Jump to content
SAU Community

Recommended Posts

Another reason they can blink fast is iff you replace your blinkers with smaller ones like i did it lowers the resistance and the flasher unit thinks there is a blown globe you either need a different flasher unit or wire in some larger globes like i did

I'm not sure if this is relevant but when I disconnected the front indicator/foggy connector

and turned the indicator on, though there's no light but the interior dash indicator indicator flashes like crazy

I'm not sure if this is relevant but when I disconnected the front indicator/foggy connector

and turned the indicator on, though there's no light but the interior dash indicator indicator flashes like crazy

i think its the same situation where if a globe is broken you have broken the curcuit so if a globe is removed the curcuit is broken too? not 100% if that correct though..

^ yep, broken curcuit will make it flash faster too. i recently had this happen after putting my front bar back on. i thought it was a blown globe, but actually it was making poor contact in the holder. cleaned it up, problem solved.

If you havent changed anything then its going to be a blown globe.

i know it started with mine because i put smaller indicators into my front bar as i hated the big ugly orange ones.

i dont mind them flashing fast but does anyone know if its illegal?

If you havent changed anything then its going to be a blown globe.

i know it started with mine because i put smaller indicators into my front bar as i hated the big ugly orange ones.

i dont mind them flashing fast but does anyone know if its illegal?

Could cause people to have seizures(sp?). So would say that it's illegal.

there is a legal rate that all cars in australia must flash between, cant remember what it is off the top of my head, fairly decent size range though, also on my 32 i noticed it doing this, stupid thing has 2 blinker globes in the corner lights, took me a while to relalise

I've got this problem of having them go fast one day and normal the next. I think there's something loose.

I get this on mine from time to time. Turns out there's a water leak letting drops of water into the socket for the rear lights and causing a short. Once it dries out, it all works fine. When the rain stops after a wet period, I usually spray some electronic cleaner in there which evaporates the water real fast...

Might be something else on yours though.

Ok yesterday I took out the Amber lens after heating it in the oven,

put in some orange bulbs and glad wrap over the indicators (just a temporary solution)

connected it back up and today my indicators go like crazy, everything is working

but the indicators are flashing like 3 times a second.

It goes back to normal when I put the emergency lights on.

Any ideas guys?

Edited by POLICE
I get this on mine from time to time. Turns out there's a water leak letting drops of water into the socket for the rear lights and causing a short. Once it dries out, it all works fine. When the rain stops after a wet period, I usually spray some electronic cleaner in there which evaporates the water real fast...

Might be something else on yours though.

Hrmm, cheers for that mate. I'm gonna keep an eye out what happens after a down pour.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW )
    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
×
×
  • Create New...