Jump to content
SAU Community

Recommended Posts

how many kms

engine bay/interior pics would help

+1

Location?

Have you got more recent pics as those are nearly a year old? I seem to recall having seen them before.

Edited by writeoff

I knew I had seen this car before: http://www.skylinesaustralia.com/forums/Or...-S-t153550.html

There is an engine bay photo there as well.

Some answers from the other thread (from a year ago) were:

Location: Brisbane

Service History: Yes (where?)

Milage: 100,000km (25.2.07)

VIN: not provided

These may have changed though so check with the seller.

I am interested in this car but need more info before I consider handing over $.

Is it currently registered?

Has the timing belt been changed?

Where has it been serviced?

What rule was it imported under?

Where was it complied?

How many owners (in Australia & Japan if known)?

Dyno graphs?

More recent photos?

Are you open to an inspection at a workshop where they can check the car, do a compression test & dyno run?

Thanks.

I knew I had seen this car before: http://www.skylinesaustralia.com/forums/Or...-S-t153550.html

There is an engine bay photo there as well.

Some answers from the other thread (from a year ago) were:

Location: Brisbane

Service History: Yes (where?)

Milage: 100,000km (25.2.07)

VIN: not provided

These may have changed though so check with the seller.

I am interested in this car but need more info before I consider handing over $.

Is it currently registered?

Has the timing belt been changed?

Where has it been serviced?

What rule was it imported under?

Where was it complied?

How many owners (in Australia & Japan if known)?

Dyno graphs?

More recent photos?

Are you open to an inspection at a workshop where they can check the car, do a compression test & dyno run?

Thanks.

hi

thank you for the questions.

got log book from japan(with service history)

the milage still the same(car was in storge for last year and engine been start every week)

car is not been register yet

The timing belt havent change yet(still got nissan factory sticker on the crank angle sensor.thats shows car has done original 100000km)

car never went on the dyno(so no dyno graphs)

car is complied

shogun car company complied this car

i am welcome for the inspection

will try to get more pics asap

also will get Vin number tomorrow.

hope this reply is good for you

if you still got any questions.please feel free to ask me

cheers

Edited by T400 Skyline
car is not been register yet

Thanks for your reply.

Can you explain why the car has been here for over a year and not registered?

What import law was it brought in under?

Did you import it yourself or has it had other Australian owners?

Cheers

Thanks for your reply.

Can you explain why the car has been here for over a year and not registered?

What import law was it brought in under?

Did you import it yourself or has it had other Australian owners?

Cheers

Hi

i am import this car by myself.there is no other australian owners.

car is under grey imports.

i was plan to keep this car,due for this car is very rare(V-spec2).

but i changed my mind and decide to sell the car.

thats why car is never register.

cheers

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...