Jump to content
SAU Community

Recommended Posts

gday, i brought a GT-T over from Japan a few months ago which had an amp and subbies installed (see pic below). question i have is, are those speakers actually 'subwoofers'? They produce a heap of bass so obviously that is their function but they have no cone (the other side you cannot see is just flat metal).

reason I ask is that the previous owner had them installed in the drivers seat (lol!). anyway i wasn't too fond of driving around with a boner all day so ripped em out but i'm tempted now to put them in the boot.

my audio knowledge is piss weak but I understand that subbies etc do need some sort of enclosure to work properley. if i mount these things behind the rear seats as-is am i wasting my time? if it's going to require fabricating a box or anything I won't bother.

cheers

EDIT: did a bit of reading and am wondering if these things are actually 'tactile transducers'? (basically a device which emits a vibration and is bolted to a drivers seat, couch etc for the person to feel - http://en.wikipedia.org/wiki/Tactile_transducer)

beatsonic001cj2.jpg

Edited by Norrissimo
Link to comment
https://www.sau.com.au/forums/topic/201261-help-what-are-these-things/
Share on other sites

your resaerch is correct. they are meant for cars with no room. alpine did them in the late 90s. nail them to a seat/floor and you had bass (or rattles :( )

ah thats a shame, i guess they are of no use to me then (except maybe as a way to freak out passengers :P )

thanks anyway

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...