Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I believe its on factory power and weights.. therefore you can change the power down, or bump the weight up but its not going to make a difference.

p platers can drive any car as long as it is a max of 125kw per tonne. it all comes down to power to weight. i can buy a gtst and decrease the power. as long as i have proof that the power is decresed then there is no problem.

if its purely on factory weights i could buy a little 60kw lancer and drop in a new engine a huge turbo and have a 460 kw little lancer.....see what im getting at

therefore as long as the car is a max of 125kw per tonne it is legal.... i went through all this when i bought my skyline, the legalities of what ive just been talking about hence i have a skyline :D also if i have an accident i will be covered! ;)

yes i own a gts-t

i dont want to go into the details too much but its rather simple.

less air = less power.

as long as you can prove that your car is under the power to weight ratio like i can and as long as you can back up your new power to weight figures with some kind of a power chart/ dyno tuners signatureand stamp with some simple mathematics everything is legal.

Originally posted by KamikazeR33

should be somewhere around that Xeaon

somewhere between 1300-2000

I dont think so, if that was the case i would be getting that but its not. It is what i assumed as well but found out they want around the 3000-3500 :|, which was quoted from just cars and they are the only ppl that said they would insurer me.

Originally posted by liquid85

I dont think so, if that was the case i would be getting that but its not. It is what i assumed as well but found out they want around the 3000-3500 :|, which was quoted from just cars and they are the only ppl that said they would insurer me.

Ouch thats just to harsh. So its no point getting a non-turbo there for.

Anyone on there P's who has a non-turbo skyline who would like to share how much there insurance is? Someone with Famous?

Originally posted by akeenan

if it doesnt work like that why have i done it? and why have i managed to get insurance with my slight killowatt detune :confused: where as without the detune they refused and wouldnt have anything to do with me :confused: !

Ok, so when the cops fine you, you just run the car to the RTA's handy weighbridge and engine dyno, after they remove, test and refit your engine and set the car up to factory weight you get off?:D

Bullshit mate.

I'm not talking about proving it to some dumbarse jobsworth at the insurance company call centre, I am talking about the legality of it. And with insurance, my thoughts would run to If the cops told the insurance company your car exceeded the regulations if you were in a decent accident, who do you reckon they'd believe?

For insurance I'll give you the benefit of the doubt, but no way would driving that car be legal under the power:weight rules.

Maybe you have a very very relaxed insurer.

Good luck in the event of a crash.

cheers,

floody

hrmmm...

car insurance is quite a problem.

I've had my car for about a month now... and still no insurance.

It's a non-turbo r34. i thought that non-turbo was easier n cheaper for insurance.. but obviously not.

Most places would insure under my dad, but once i tell them i may be driving(19yr old) 'if i was required to' they reject. and other places like famous are quite expensive.. i got quoted 3k. i thought it'd be alot cheaper... esp for a non-turbo car. Now, i might even consider selling the car and getting something simple for a few years.. lol

btw. does anyone know whether famous does 3rd party?

Floody, i live in Sydney but deal with modified cars from Melbourne. From what i've managed to grasp (this is relating to old-school V8 Aussie muscle cars) you carry your report which has power:weight on it (incl dyno sheet) like an engineer's report so when the cops pull you over, your engine no. VIN no. and plates all match up and they can't do anything about power:weight UNLESS you've modified the car in a defectable way. Just like having an engineer's report in Syd. or QLD

dyno sheets are all well and good, but any cop I've spoken to says the rules refer to (flywheel)power to weight. I understand you can extrapolate flywheel power from rear wheel power, however it is far from accurate- in fact I'd go so far as to say its too inaccurate for the police.

I don't think driving the car in a bad state of tune is going to cut the mustard, even if it is dynoed at that power level.

And for the thread starter, for anyone just old enough to get their license, unless you have extensive motorsport experience or something, a 185kw car is a BAD thing.

On the other hand, yeah get it, when you smash it I'll buy the front cut from your grieving parents :) .

cheers,

floody

Yes. There is a championship for it. More motor sport than burnouts or dyno shootouts. Yanks want to put it on ESPN as there is now a US-D1 championship slated for 2004. 8 rounds (so far) of action, mostly on the west coast, but with 2 Florida-based rounds looking to join in and a proposal from Hawaii to get involved.

really? maaad, so you reckon that would be a good motorsport to pick up, aside from club level track work? i mean, it's cheaper to run(isn't it?) and you get the best fun out of it, i mean, it's drifting!!!!! could be my next job, lol

Hmmm. Not really the same as club-level racing. You can do both but drifting is like burnout comps: you really need to set the car up specifically for it. Some of the Jap tuning houses and drivers i've talked to through work reckon it's murder on cars and a full rebuild is needed after 1 season of pro competition. You chew tyres and make friends with panel beaters and diff and gearbox specialists...

Remember: a drifter used to be another name for a bum/homeless person/vagrant...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...