Jump to content
SAU Community

Recommended Posts

Hey guys. I have an R32 with an RB20det engine. When the car has just about reached its normal temp after driving for a few minutes the idle plays up. For example when i pull up at lights i notice it being erratic. Anyone know what the problem could be? Thnaks peeps.

Link to comment
https://www.sau.com.au/forums/topic/201360-erratic-idle-on-rb20/
Share on other sites

mine has the same issue, thought it might be the afm, since when it was on cold start he was fine, no such luck though. lately in hot weather he's been sitting fast at 1200 for no good reason, not a boost leak either. *shrugs*

he still does it occasionally, but a little heel/toe here and there stops the rare conking out ;)

might try the IAC myself, thanks Wheezy :D

Thanks guys ill give these ideas a go when i get a chance. Its just weird that it only does it before it reaches its regular tempreature. Once it has warmed up it doesn't do it anymore. Ill let ya know if these suggestions work. Thanks

ive got a mate with the same problem - identical to what you said

funnily enough we put an rb20 ap eng powerfc in his car on thursday night and it fixed his idle

he also had starting problems, it would never start with the stock ecu, he had to almost flood it (carby style) to make it start

it started first crank with the powerfc

let us know if you find somthing

My mates does the same thing... Just always assumed it was the TPS. Im guessing the IAC and TPS could be the same thing >_<

TPS = Throttle Position Sensor

IAC = Idle Air Controller (also called AAC valve, Auxillary Air Control valve)

I would say it would be the IAC, you need to remove it from the inlet manifold, pull it apart and give it a good clean. It will be full of old soot and oily gunk.

If it was idling funny all the time I would suggest checking the TPS.

Edited by daisu
  • 1 month later...

Hey guys i cleaned the IAC and its all sweet thanks heaps!

ive got a mate with the same problem - identical to what you said

funnily enough we put an rb20 ap eng powerfc in his car on thursday night and it fixed his idle

he also had starting problems, it would never start with the stock ecu, he had to almost flood it (carby style) to make it start

it started first crank with the powerfc

let us know if you find somthing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...