Jump to content
SAU Community

Recommended Posts

If you look around you might be able to find somewhere that sells the latest Best Motoring DVD that came out with a full feature on the R35. Oh and some lancer's n imprezza's n swift and other garbage.... but most importantly the R35.

http://www.bestmotoring.jp/BM/200802/

ph_1_01b.jpg

ph_1_02b.jpg

ph_1_03b.jpg

ph_1_04b.jpg

ph_1_05b.jpg

ph_1_10b.jpg

ph_1_11b.jpg

Watched it today, not a bad episode.. they seemed to like it a lot :).

Was interesting to see how much faster the new WRX sti (2l though) is than the old one, and how much not faster the new evo is compared to the old one heh.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If there's enough meat in the housing where you want to put the M12 adapter, then do it, but be aware that if/when you f**k that up you'll probably be repairing it before doing anything else. I'd just drill it out and tap ina 1/4" thread. No need for rocket surgery when the next most obvious thing will do. You could throw a 1/4 x 1/8 bush in there and use the same fitting you intended to use.
    • Is the only issue that the oil catch can is getting filled on hard runs? I'd be thinking more about oil control issues rather then the head lifting, especially as you aren't seeing spiking in the coolant pressure.  Do you need restrictors in the head, or better drains from the head? Does the sump need venting to the catch can?
    • Tried to make 1/8npt threads into compressor house of the turbo for my EBC. Threads got fu#ked and ended up with and elongated hole, so I do have good amount and nice threads 90% of the hole but 10% I only had 1-2threads there and rest of it is flush on that side of the hole.. So my idea is to do M12 x 1.25 to AN4 with braided lines instead of 1/8npt to 4mm vacuum silicone hose.  and hopefully get a better thread. M12 is quite big and AN4 is a little bit bigger than 4mm (4.9mm inner diameter braided PTFE hose). but this should work. Thoughts? Otherwise I will weld and adapter onto the turbo.   
    • Looks great, I hope everything is working well after all that time!
×
×
  • Create New...