Jump to content
SAU Community

Recommended Posts

Yeah, the 500 in GT500 is the maximum power output (in ps) of the engines for the cars in that class. The GT300 cars have a power limit of 300ps.

since the japs like to use ps

Yeah, I don't understand the French (who invented the standard units).

There's a perfectly good existing metric unit for power (the watt) which is what the Standards Body is all about. The "horsepower" is an imperial unit based on what James Watt hypothesised a horse could do, and then knocked a bit off that so when he made a "1hp" engine people wouldn't disbelieve him.....and the "power stroke" value is limited just to engines and is a metric'ed version of that imperial unit.

Link to comment
https://www.sau.com.au/forums/topic/201635-gt-r-gt500/#findComment-3583156
Share on other sites

Yeah, the 500 in GT500 is the maximum power output (in ps) of the engines for the cars in that class. The GT300 cars have a power limit of 300ps.

Yeah, I don't understand the French (who invented the standard units).

There's a perfectly good existing metric unit for power (the watt) which is what the Standards Body is all about. The "horsepower" is an imperial unit based on what James Watt hypothesised a horse could do, and then knocked a bit off that so when he made a "1hp" engine people wouldn't disbelieve him.....and the "power stroke" value is limited just to engines and is a metric'ed version of that imperial unit.

PS is actually a german word. Pferdestärke = horse strength

1 PS is 0.73ish kilowatts, and 0.986ish horespower

read all about power ratings here

http://en.wikipedia.org/wiki/Horsepower

Link to comment
https://www.sau.com.au/forums/topic/201635-gt-r-gt500/#findComment-3583292
Share on other sites

PS is actually a german word. Pferdestärke = horse strength

1 PS is 0.73ish kilowatts, and 0.986ish horespower

read all about power ratings here

http://en.wikipedia.org/wiki/Horsepower

horespower? now theres a new one. :D

Link to comment
https://www.sau.com.au/forums/topic/201635-gt-r-gt500/#findComment-3583324
Share on other sites

Yeah, the 500 in GT500 is the maximum power output (in ps) of the engines for the cars in that class. The GT300 cars have a power limit of 300ps.

Yeah, I don't understand the French (who invented the standard units).

There's a perfectly good existing metric unit for power (the watt) which is what the Standards Body is all about. The "horsepower" is an imperial unit based on what James Watt hypothesised a horse could do, and then knocked a bit off that so when he made a "1hp" engine people wouldn't disbelieve him.....and the "power stroke" value is limited just to engines and is a metric'ed version of that imperial unit.

scathing me ol mate. I have no idea what you are on, but ps is not a french measurement, and nor does it stand for power stroke... lol even if it were french why would it have an english name? it's german, let your fingers do the googling as I cant be knackered typing it out and I will just look dumb spelling it wrong.

edit: d'oh beaten to the punch.

Link to comment
https://www.sau.com.au/forums/topic/201635-gt-r-gt500/#findComment-3583355
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Need to see other side of PCB in that area...ie; I don't see any thru-hole mounting, just soldered vias (smd zeners in SOT23 have 3 legs but only 2 are used, as reflected by PCB tracks)
    • 4 to 5 is fine. It will be slow, but that's better than blowing turbos. I don't have a PS pump idle up solenoid on my car, because... I think when we put the Neo in we retained my R32 lines. But.... From inspecton of the R34 vacuum hose diagram, you can see that the solenoid needs to be connected to the turbo inlet as source of clean air) and the plenum (as source of vacuum - which is the place for the air to flow to to cause the idle to increase). So 3 to 1 is VERY WRONG. 3 should go to either the turbo inlet, or the plenum. Follow the other hose from the PS solenoid and if it goes to the plenum, then your 3 goes to 2 2 would also serve as a bleed port for a boost solenoid.
    • Pull them out and pull more apart. You can't do shit with them still bolted to the floor of the car.
    • Yes it is. ZD1 is on the other side of the board. Where ZD1 is marked is clearly opposite a 2 pin device. Our 3 pin device here is not a ZD.
    • Alright, a little update on this... I called Fulcrum, who used to be the distributor in Australia. No Bueno, they don't service them anymore.  Called shock works, who don't service them but offered to dyno the shocks for performance, and suggested DNA in Sydney might service them.  Called DNA, who also do not service them and basically said they try to steer customers away from tein for this exact reason these days- there is just no support for them anymore apparently.  Both SW and DNA said they are a not necessarily a bad product, but they just don't service the brand or know anyone who does service the brand anymore.  So... I could keep calling around but at this point I think I'll probably just spring for the shockworks product, unless anyone here knows anything.  Cheers 🍻 
×
×
  • Create New...