Jump to content
SAU Community

Recommended Posts

following on from the place that sells the alloy radiators

ive just picked up a nice price on oil coolers kits

ive gone through a few cars with oil coolers and these are the best ive seen at a good price

anyway what ya get

cooler kit with billet alloy annodised sandwich block and remote oil filter housing and 12 row oil cooler, -10 stainless braided hose with anodised alloy fittings, has two optional drilled and tapped holes in the billet alloy remote mount for oil temp and pressure gauges, and if not used has alloy bolts to block these off. Also supplied with alloy strap nuts and bolts for fitting to make own brackets, not pictured. Retail $395 group buy price $340 .

A bit more for supply of alloy bracket material and can't get any cheaper from supplier.

delivery they said 30 bux anywere in australia (thus why i recomend pick up cause it saves you cash!!!!!!!!)

what ya get

the box it comes in

DSCF6188.jpg

opening it up

DSCF6186.jpg

billet fittings

DSCF6190.jpg

annodised alloy fittings

DSCF6191.jpg

the whole lot

DSCF6189.jpg

anyway they seem like a good kit, i cant confirm how well they work due to some fag flogging and smashing my car but its an oil cooler kit and hey they cool oil

once again i dont make any cash of these so be nice on the phone please

this is the price they offered, i am just a middle man and pass on money and you get the gear

anyway i encorage pick up to save ya money

Link to comment
https://www.sau.com.au/forums/topic/201645-oil-cooler-kit/
Share on other sites

Hey fatz, ifI wanted to install oil pressure gauges and oil temp, does it have place for that? I was told they go on that orange thingy. Can you confirm?

And also, are they able to do a kit without the oil cooler itself but just the hoses?

Link to comment
https://www.sau.com.au/forums/topic/201645-oil-cooler-kit/#findComment-3583158
Share on other sites

Hey fatz, ifI wanted to install oil pressure gauges and oil temp, does it have place for that? I was told they go on that orange thingy. Can you confirm?

And also, are they able to do a kit without the oil cooler itself but just the hoses?

yea they come with the fitting for two guages on the block

Pete

Link to comment
https://www.sau.com.au/forums/topic/201645-oil-cooler-kit/#findComment-3583183
Share on other sites

  • 4 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...