Jump to content
SAU Community

Recommended Posts

Hey guys. I'm considering to lowering my Stagea. Currently is on standard height with my 18x8's on it. I'm considering lowering it by 1 - 1.5 inches. I want it to look nice and low but able to carry back passengers, cargo and get over speed humps but not make it too illegal.

A friend of mine said to get some Kingsprings..

What ideas can you give me and how much would it cost

Link to comment
https://www.sau.com.au/forums/topic/202380-lowering-the-stagea/
Share on other sites

bilstein shocks from Sydneykid on this forum http://www.skylinesaustralia.com/forums/St...mp;hl=group+buy

can also get his whiteline springs.

also a rear camber kitwill be needed; front camber kit, front castor kit are also money well spent.

I would do the Shocks/springs/bushes then whatever/whenever, or shocks/bushes then whatever/whenever.

Doing just springs will damage the shocks, using the Height adjustable bilsteins shocks will be awesome!

-Ryan

SK kit all the way. I just got mine readjusted to the lowest of the SK settings, and it is awesome! Still a reasonable height, too. For reference, I run 18s as well, and the ride is firm, but acceptable.

Sorry to hijack this thread but has anyone used the Tein coilovers on a stag yet?

Yes, got TEIN super wagon's on mine, good firmness, not too much though, height adjustable, just be sure to grease the pillowballs before you install, squeak, squeak

Yes, got TEIN super wagon's on mine, good firmness, not too much though, height adjustable, just be sure to grease the pillowballs before you install, squeak, squeak

Fantastic - how low does it go? I want it to be LOW :P

Of course i'm going to replace the shocks on it. Was considering getting Bilstein shocks as well. I've got a few really good suspension places where I live and can give me some good advice (good friend of mine works for at one of those places)

A few of my mates have advised me to install Tien goodies. but I really can't justify the pricetag and for me personally I don't see any great use for me

http://www.skylinesaustralia.com/forums/Te...-h-t199188.html

Check out my thread, StageaNut and Jason. Am VERY busy atm but have two offers on the table in regard to swaps. Depends where you are. My avatar pic shows my Teins at very close to the top of their adjustment range. Will drop so that tyres are inside the guards, comfortably! They are similar to Super Wagons but are slightly firmer in the front and slightly less firm in the rear (to match weight distribution). PM me if you like.

Ok just went around and visited my mate after work to talk shop...he's convinced my to go with Tein coilovers - either Hybrid Wagon or Super Wagon... He's going to get back to me with prices...One thing i'm not going to install is the EDFC Controller from what i read it requires the rear tops to be cut out and not able to use the rear shade (knowing my luck it would have to be cut out regardless)

Can you tell me what the difference is between the Hybrid Wagon and Super Wagon Coilovers??

SK do you still have the link for suspension settings. i can't find it on the Group Buy page.

I have fixed the link in thre Group Buy thread

http://www.skylinesaustralia.com/forums/St...lin-t85592.html

The recommended settings are also in the Stagea Suspension thread

http://www.skylinesaustralia.com/forums/St...ion-t53079.html

Cheers

Gary

Ok just went around and visited my mate after work to talk shop...he's convinced my to go with Tein coilovers - either Hybrid Wagon or Super Wagon... He's going to get back to me with prices...One thing i'm not going to install is the EDFC Controller from what i read it requires the rear tops to be cut out and not able to use the rear shade (knowing my luck it would have to be cut out regardless)

Can you tell me what the difference is between the Hybrid Wagon and Super Wagon Coilovers??

Most people find the Japanese spec Teins to be too harsh, so be careful in your choices. Adjusting the rebound damping has almost zerro effect on the ride comfort, so shock adjustablility won't help you.

Cheers

Gary

go for a ride in a car with teins, then go and buy bilsteins :D

Well that's the reason I don't Teins...I've got two mates with Tein Super Streets installed (one in a skyline and the other in an 180SX) and my god the ride was frim if not hard.

I'm going to some very good suspension places in my area and shop around for some prices.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...