Jump to content
SAU Community

Recommended Posts

I Have a set of 4 x 18' BBS in wheels in Shadow Chrome for sale

They come with 265/35/18 Yokohama Advan Neora Tyres with around 80% to 90% tread left

They are currently fitted to my R34 GTR

The Wheels retail for $850.00 each US and the tyres for around $500.00 US each

I'm asking $1600.00 ono for the lot

The wheels can be inspected at Wetherill Park NSW

Ph 9725-5577 Work hours

post-28291-1201057704_thumb.jpg

post-28291-1201057964_thumb.jpg

post-28291-1201058198_thumb.jpg

Edited by JonoT
Link to comment
https://www.sau.com.au/forums/topic/202792-bbs-18-wheels-for-sale/
Share on other sites

Could you please give width and offset and the condition, any gutter rash etc

Yeah will do. I'll post those details tomorrow.

As for condition the wheels are in very good condition. I think only 1 wheel has slight Gutter rash but nothing to serious I'll see if i can get some photos up as well

Thanks,

I Have a set of 4 x 18' BBS in wheels in Shadow Chrome for sale

They come with 265/35/18 Yokohama Advan Neora Tyres with around 80% to 90% tread left

They are currently fitted to my R34 GTR

The Wheels retail for $850.00 each US and the tyres for around $500.00 US each

I'm asking $1600.00 ono for the lot

The wheels can be inspected at Wetherill Park NSW

Ph 9725-5577 Work hours

post-28291-1201057704_thumb.jpg

post-28291-1201057964_thumb.jpg

post-28291-1201058198_thumb.jpg

Hi Jonathan

I called the Wetherill Park No. this afternoon, but maybe you didn't get the message...

My name is Terry and I'll be happy to come over this weekend and inspect the wheels. Since I also have a R34 GT-R I'd like to see the wheels on your car still, if I could.

My E-Mail is [email protected]

My Ph No is 0416-214699

Regards,

Terry

I Have a set of 4 x 18' BBS in wheels in Shadow Chrome for sale

They come with 265/35/18 Yokohama Advan Neora Tyres with around 80% to 90% tread left

They are currently fitted to my R34 GTR

The Wheels retail for $850.00 each US and the tyres for around $500.00 US each

I'm asking $1600.00 ono for the lot

The wheels can be inspected at Wetherill Park NSW

Ph 9725-5577 Work hours

post-28291-1201057704_thumb.jpg

post-28291-1201057964_thumb.jpg

post-28291-1201058198_thumb.jpg

I don't need these for myself. But one of the guys in our GT-R club would like to view these.

Are they sold or still available?

Regards,

Thomas

BBS RG-Rs are invariably 18x9.5+20 you can't see it very well, but the sizes and offset are stamped into the front of the wheel. From the second picture I can make out something resembling 9½Jx18 but there should be ET20 on it as well.

This is a stupidly cheap price. Whoever gets these is getting a great deal.

Edited by Laurence
Theyre sold. I have them :D

Arrrgh, I hate you!!! :P

Could you take a quick look and see if they say ET20 and 9½Jx18 on the face near the centre cap?

These are one of my two favorite wheels... I have been chasing a set of 17x9J+14 so you can make a nice 17/18 staggered set of wheels for something like an S15.

Enjoy your wheels kkkk :(

Well that certainly is an upgrade, in both spec and baller status.

Anyway, what are you doing online, you should be outside drooling over your wheels, then wiping them clean, repeat...

that is what I would be doing :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...