Jump to content
SAU Community

Recommended Posts

Hi all... Just moved down to Sydney from Central Coast/Newcastle and now I need to find a new mechanic close by. I live in Hills District and work around Norwest so something close to that or open Saturdays would be best...

Does anyone have any suggestions where to take my R33 to get a service/new clutch/etc?

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/202991-good-mechanics-hills-district/
Share on other sites

MRC in Castle Hill have looked after me. Mark is a great guy always helpful. Unlike some of the other workshops with a lot of less experienced boys working for them Mark and John do all the work themselves taking the risk out of it

The best mechanic by far in the Hills District is Mark at MRC in Castle Hill. He was the only person that used to touch my R32 GTR and now my R34 GTR! He explains everything so you understand whats going on. Im an extremely fussy person and there have never been a time where i was dissappointed in him!

96345399. Contact number for MRC-Mark

  • 2 years later...

I have a friend who lives at West Pennant hills, she is looking for a trustworthy, honest mechanic to service her BMW. I think she might feel a bit funny going to a "performance" workshop, and I get the feeling they would probably be a bit pricier. Any recommendations?

Cheers

I have a friend who lives at West Pennant hills, she is looking for a trustworthy, honest mechanic to service her BMW. I think she might feel a bit funny going to a "performance" workshop, and I get the feeling they would probably be a bit pricier. Any recommendations?

Cheers

Ask her if she knows the Woolworths/Caltex Underneath Cherrybrook Village, the workshop has been there for 20 years, they do it right by the book for normal cars and Euros. I wouldn't take an import there though for anything more than oil change, one of the mechanics used to own a r33 GTR but he has since left. There are no other decent shops in Hills area.

To the OP,

+1 for Unigroup

+2 for Unigroup

+3 for Yavus @ Unigroup

-500 for hills motorsport

-500 for Unique Motorsport

I have a friend who lives at West Pennant hills, she is looking for a trustworthy, honest mechanic to service her BMW. I think she might feel a bit funny going to a "performance" workshop, and I get the feeling they would probably be a bit pricier. Any recommendations?

Cheers

tell your friend parramatta prestige

in north parramatta

not too far and pretty much the cheapest place in sydney for euro parts (asv is probably the cheapest) though the labour charge at parramatta is a lot more cheaper if you do parts + labour and there pretty honest about the work. Would not recomend anyone else for bmw's.

Also living in West Pennant Hills, i would honestly not take it to anyone nearby (not sure about the guys in castle hill as ive never dealed with them)

but i live nearby and take my car 30-60 mins away for any work done on it (have had minor bad experiences with few mechanics in the area, and most other mechanics prices are a joke if you want anything more than a basic service)

tell your friend parramatta prestige

in north parramatta

not too far and pretty much the cheapest place in sydney for euro parts (asv is probably the cheapest) though the labour charge at parramatta is a lot more cheaper if you do parts + labour and there pretty honest about the work. Would not recomend anyone else for bmw's.

Also living in West Pennant Hills, i would honestly not take it to anyone nearby (not sure about the guys in castle hill as ive never dealed with them)

but i live nearby and take my car 30-60 mins away for any work done on it (have had minor bad experiences with few mechanics in the area, and most other mechanics prices are a joke if you want anything more than a basic service)

Kane motor sport Balgowlah, is very good and reasonable, total BMW specialist.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...