Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Yer thats wat i thought

He never decibel tested it but im guessin it would be very close to the limit

He just decided he would make me lose a point and a $75 fine afta lookin at it

if you have ANY part that isn't standard on your car, then technically you need a mod plate

it might be legal (as in under 90dB) but you need an engineer to prove this

most don't bother but if you got done then unfortunately they are within their rights

So i do need a mod plate

Thats pretty shit

Well i bought the car off a fairly reputable dealership and u think that u wouldnt be able to get a roadworthy without one (Obviously some fairly easy ways around this tho)

Thx For all your help guys!

A simply rule of thumb for you;

If the car comes standard with a item and you replace it with a "better" or "different" item you do not require a mod plate.

For instance i put a high mount turbo on my r33 when i had it, and no i didnt need a modplate as he car was factory fitted with a turbo. I was simplly changing it for a "better" aftermarket item, and i still included all anti-polution items required to make it 100% legal...

So in short no you do not need a mod plate for an exhaust at all.

As for legality of the exhaust all you need to watch out for it that at the lowest point it is more than 100mm off the ground and that it is not over 90db and you'll be fine...

Yer thats exactly what i thought

But the police make the decisions and from what ive seen and heard they almost always final

Just gotta get on with life and accept the responsibilty/Bad reputation of owning a skyline

STILL WORTH IT THO!

Well my understanding was depends on which law they are reading, and thier personal interperatation of that law.

Either way the system needs sorting out so its the same for all states, with one interperatation.

A simply rule of thumb for you;

If the car comes standard with a item and you replace it with a "better" or "different" item you do not require a mod plate.

For instance i put a high mount turbo on my r33 when i had it, and no i didnt need a modplate as he car was factory fitted with a turbo. I was simplly changing it for a "better" aftermarket item, and i still included all anti-polution items required to make it 100% legal...

So in short no you do not need a mod plate for an exhaust at all.

As for legality of the exhaust all you need to watch out for it that at the lowest point it is more than 100mm off the ground and that it is not over 90db and you'll be fine...

That was my understanding, something like changing your exhaust falls under the "light modification" rules for queensland transport. Only the "heavy modification" like engine/transmission swaps, changes to safety features (e.g. cages) etc etc required mod plates.

Unfortunately then there's the new police rules which don't seem to coincide and leave people wondering/fined etc.

go to court.

the actual fine should read "modifying a silencing device so as to reduce it's effectivnes"

probably worth a try arguing that it's purpose is to keep the car below the set legal limit, and that it still does that so it is in fact not reducing it's effectivness.

was it a traffic cop?

better chance if it was as most magistrates don't really seem to like traffic cops.

Another way to think of it;

Ok, so a car has an OEM exhaust from new, you drive said car for 5-6 years and it starts to devolp an exhaust leak.

So you take the car to an exhaust shop and simplly say fix it, so they then find there is a rust hole in the muffler and say no worries we will put a new muffler on.

If one were to need a mod plate, technically this person above would require one too. As no exhaust shop puts in OEM parts even when simplly replacing a dodgey muffler.

Hence requiring a mod plate for an exhaust is not true, as almost every car thats more than 10 years old would have had some form of exhaust mod made, and if a car were 15+ years old the entire exhaust would have probablly been replaced at some stage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
×
×
  • Create New...