Cusco Arms For R32 Gts-t

[Psymon]

Going to order some Cusco adjustable arms for my R32 GTST but getting accurate descriptions and part numbers seems to be difficult. Looks like a lot of it was lost in translation. So i'm hoping someone on here has bought them all before and can confirm what i've figured out so far.

220 474 L are front camber arms

220 474 G are traction arms for rear

220 743 AS are the front castor arms

220 474 E are rear toe arms

Is this right??

I've figured all that out by extensive web searching and talking to a mate who bought all the cusco gear for his s13. I'm fairly sure the s13 and r32 use the same part numbers but just wanted to double check before ordering.

Cheers, Simon.

Edited February 1, 2008 by Psymon

[Sydneykid]

No, S13's don't have HICAS or double wishbone front suspension

Cheers

Gary

[Psymon]

hmmm i didn't even think of that.... most sites i've looked at list the same part numbers for s13s and r32s though?

[BHDave]

No, S13's don't have HICAS ....

Some do.

S13 and R32 share caster rods, rear upper arms and traction rods (front upper arm on the rear) as far as cusco are concerned.

Also the front caster rod braces.

No idea on part numbers. I just look at the pictures normally

Edited February 1, 2008 by BHDave

[Sydneykid]

Some do.

The ones that have replacement "rear toe arms" don't, which is what he asked.

Cheers

Gary

[Psymon]

Some do.

S13 and R32 share caster rods, rear upper arms and traction rods (front upper arm on the rear) as far as cusco are concerned.

Also the front caster rod braces.

No idea on part numbers. I just look at the pictures normally

Even the pictures seem to be all over the shop. It's annoying!