Jump to content
SAU Community

Recommended Posts

Hi all,

I am considering to import a Skyline R32 GTR as a weekend/track car.

A few quick questions for those who own one...

1. Who (in Sydney) look after your R32?

2. Are R32s very hard and expensive to maintain compare to the other JDMs?

3. Are there any common problems/hard to fix problems?

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/204096-newbie-questions-regarding-r32/
Share on other sites

Hi all,

I am considering to import a Skyline R32 GTR as a weekend/track car.

A few quick questions for those who own one...

1. Who (in Sydney) look after your R32?

2. Are R32s very hard and expensive to maintain compare to the other JDMs?

3. Are there any common problems/hard to fix problems?

Thanks in advance.

Welcome!

1. I dont have a 32 GTR but Unigroup and Grey Imports look after my car. I have done a fair bit of track work and many driving/track events with mine and so far so good.

2. GTR's compared to say...late model type R JDM? (Prob better of using the term "import" or so here, unless you are on JDMST forums....) Then yes, it will cost more. Most people here will say budget another 8 - 10k for a 32GTR if its "cheap" because it may need to be rebuilt. They are getting on in age, and also the history comes into play.

3. Common problems - Im sure theres quite a few! If you have BIG hp - standard gearbox wont hold up after a while - and old member here went through 2 gearboxes with 370akwk

Oil pump?

Turbo's?

Compression etc

These need to be considered and checked if possible!

If its for the track, Duncan is the best man to speak with, same with T04GTR :(

Good luck mate!

Cheers!

Depends if your mechanic has had exp with them!!

Ive got a lock bar for my HICAS - however if you take it to a place that knows them, you wont have a drama!

Question - Is that one of the deciding factors for buying the GTR?

If it is - I wouldnt worry, theres alot of people on here who can help and theres many work shops in Sydney!

You'll be right mate - go out and buy!!!

One inherrent problem is oil control. Its potentially dangerous and rather annoying to rectify, ie. sump baffle plates, oil restrictors, overfilling your oil, upgrading your sump.

Other than that, just check the compression, and you may want to change to steel-wheeled turbos. Some people find HICAS annoying too.

Besides that its a great quick car. Oh and the gearboxes dont handle redline, 350awkw+ super quick smash-it-in-style shifts very well.

Hi all,

I am considering to import a Skyline R32 GTR as a weekend/track car.

A few quick questions for those who own one...

1. Who (in Sydney) look after your R32? I have a Gtst but it's close enough.. I have been through a couple of workshops and I just can't go past Powerplay imports in Drummoyne.. They are GTR specialists.. There work is fantastic..

www.powerplayimports.com

2. Are R32s very hard and expensive to maintain compare to the other JDMs? There about the same.. Most of the parts these days are cheap.. Usually easy to find.. Even the 2nd hand stuff is worth looking at.

3. Are there any common problems/hard to fix problems? Usually just old wear and tear.. Mostly Bushes go on them and suspention parts before anything else happens..

Thanks in advance.

Depends if your mechanic has had exp with them!!

Ive got a lock bar for my HICAS - however if you take it to a place that knows them, you wont have a drama!

Question - Is that one of the deciding factors for buying the GTR?

If it is - I wouldnt worry, theres alot of people on here who can help and theres many work shops in Sydney!

You'll be right mate - go out and buy!!!

Haha I just had mine rear rack welded up.. Stuff those lockbars!

Besides that its a great quick car. Oh and the gearboxes dont handle redline, 350awkw+ super quick smash-it-in-style shifts very well.

Another Question in relation to the gear box, what is a common replacement? can you source one from another car or would it require a complete aftermarket gearbox. As i have heard of drifters using the R33 GTST gear box.

Thanks

gearbox? you can go another used one for about 800, rebuild yours or buy a brand new one for about 2500 or go aftermarket (os giken 5k, PPG 10k, hollinger 20k) that about covers the range. Until you get to pretty big powe rthe box will be fine

where are you based? there are good shops all over the place.

1. Who (in Sydney) look after your R32?

2. Are R32s very hard and expensive to maintain compare to the other JDMs?

3. Are there any common problems/hard to fix problems?

1) There are no shortage of people/workshops doing good work on GTRs. They've been out for ages, and there is a well trodden path for any type of upgrade you can think of. There is nothing new under the sun when i comes to R32 GTRs.

2) It depends on who you talk to. If you talk to P-plater who borrowed to buy and can afford to maintain it, then they would say yes. But as you are buying a track/weekend car, then you expect to need to replace a whole list of 8year old parts. Compared to my previous track/weekend weapons the costs have been the same.

I think there is a perception that these cars are expensive to fix/maintain, but i think that comes more from the kids/P-platers who buy them and can't afford to maintain them, yet want to flog the guts out of them. If your buying a car for the track, then you will need a bank of cash to support it. Same with any track car. With my last track car (rotary) i had to rebuild two engines.

3) I don't think there are any 'hard to fix' problems with the R32 GTR. For the track and age of the car you couldn't go wrong with doing the following;

-Your suspension will be 9-7years old. Replace the lot, and piss off the HICAS.

-Heat will be something to watch on the track. Fit an oil cooler + powersteering cooler and while you're at it, a larger radiator isn't going to break the bank.

-Hi RPM and cornering added with the oil control issue with the RB26 will be something to think about. There are a few options here, some are cheap and others require the engine to come out. Do a search on oil control modifications.

-I found i got some advantages out of a attesa controller.

-Gearbox syncros in 3-4th will stuff up under the hammering. You've got a few options already outlined.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...