Jump to content
SAU Community

Recommended Posts

Does anyone have any values for tuning a Power FC on an R34 GTR with Nismo high flow AFM's.

Other mods include full exhaust, GT2860R -5 turbos, Sard 700cc injectors, Nismo fuel pump, bigger FMIC, HKS pods.

Want to get the injector and AFM values right before the finer stuff.

STD injectors were 440cc.

Link to comment
https://www.sau.com.au/forums/topic/204231-r34-gtr-tuning/
Share on other sites

Could you remember to post up your results from your tune as well?

Almost identical parts going into mine and I'd like to compare once it is running again.

thanks.

James.

ps were you turbos labelled 2860r or 2560r on the punched plate on the cartridge?

Link to comment
https://www.sau.com.au/forums/topic/204231-r34-gtr-tuning/#findComment-3620254
Share on other sites

Could you remember to post up your results from your tune as well?

Almost identical parts going into mine and I'd like to compare once it is running again.

thanks.

James.

ps were you turbos labelled 2860r or 2560r on the punched plate on the cartridge?

Here's a dyno sheet of the latest result but it's still not running right and developed a boost leak on this run.

All new GT2860R -5 turbos are now stamped 2560.....there's a spiel about it on the Garrett site. The specs are still GT28 though.

post-44795-1202045047_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/204231-r34-gtr-tuning/#findComment-3621381
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...