Jump to content
SAU Community

Garrett T04 Turbo (steel Wheel Internals, B/b Cartridge)

cheez
 Share

Recommended Posts

cheez Mentor

cheez

Posted
Posted (edited)

Item: Garrett T04 Turbo

Age: unknown, but was REBUILT recently and hasnt been on a car since.

Condition: like new

Price: $700 ONO

To Fit: (What car) any car

Location: melb

Contact: daniel 0423 089 477

Comments:

T04 turbo. was gonna go on my project HJ that i am building. was gonna be strapped to the side of a 202 engine but didnt eventuate after consultation with some turbo experts.

some specs:

external wastegate

comp a/r: .60

exh a/r: 1.00

HP: 600hp

Flange: not sure. looks almost like T3 but i think not? input?

has steel turbine fins and a garret ball bearing cartridge in it. awesome turbo. rear housing not clean like comp, coul use a powdercoat or just a quik clean

OPEN TO OFFERS

post-31466-1202294903_thumb.jpg

post-31466-1202295016_thumb.jpg

post-31466-1202295089_thumb.jpg

Edited by cheez
W0rp3D Grand Master

W0rp3D

Posted
Posted

You better off trying www.ausrotary.com that exhaust housing is too big for most rb's.

The flange is to4 not t3.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Mistakes were made, my R34 Story

      By Dose Pipe Sutututu · Posted

      Maybe it's time for a M3 F80 LCI, and leave it stock.  Drive it to a shop, sip on your latte with nutmeg whilst it gets serviced and on the way home swing by and grab some chai mix for the evening.
    • -Jimmy-
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By -Jimmy- · Posted

      Great work! Thanks for documenting the process.
    • joshuaho96
      Squeaking clutch/throw out bearing

      By joshuaho96 · Posted

      How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • Dobz
      [Geelong,Vic] Used: pull type R33 GTR gearbox (no transfer case), Nismo super coppermix twin plate clutch

      By Dobz · Posted

      price drop $1000 gbox $400 clutch
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
×
×
  • Create New...