Jump to content
SAU Community

Recommended Posts

starlet GT engines are awesome little things. I have one in a mini (old schooler), its not running yet. A couple of people in Aus are have them in minis and running 12sec passes out of the box.... For sure they SNAP my skyline

DRP-OOF - why are you posting in a thread about starlets then?

Monkey - I'm comfortable on my horse..

you two lesbians need to chill out.

Cause I have shit to say... and again, you're defending yourself... stop arcing up so much...

and heaps creative on the letter there... my plates were actually 'modified' once with white-out and a pen :P

So you're not the first...

there is no "factory" supercharged/turbo starlets.

I'm sure it's doable, but would be a lot of money for nothing.

I'm assuming you have the aus delivered shopping trolley version.

you can turbo charge that..

or engine conversion from the jap spaec EP82 starlet which has the 4e-fte turbo 100kw engine.

Sydneykid had once mentioned that he knew of someone who had shoehorned a sivler top 20 valve 4age in to one.

those motors are 118kw I think..

was apparently a bit of fun to throw around.

FYI to the above - there are starlet GT's - turbo from the factory...

i was thinking about buying a turbo stalet a while back. they do a low 15 second 1/4 stock, so a few mods like exhaust, cooler, and more boost and you should be into the low 14's pretty darn easy, and still have a car that you can park in the trolley bay at coles.

i was thinking about buying a turbo stalet a while back. they do a low 15 second 1/4 stock, so a few mods like exhaust, cooler, and more boost and you should be into the low 14's pretty darn easy, and still have a car that you can park in the trolley bay at coles.

thats it hey, can be a nice quick commuter!!

FYI to the above - there are starlet GT's - turbo from the factory...

I should have typed that as supercharged+turbocharged.

I initially thought the OP was asking to supercharge his already turbo starlet.

as in, I thought he had a Starlet GT which he also wanted to supercharge.

like twin charge.

there is no "factory" supercharged/turbo starlets.

or engine conversion from the jap spaec EP82 starlet which has the 4e-fte turbo 100kw engine.

make up your mind? or were u implying there were no aus spec turbos?

i had a gt starlet years ago.

ran a 12.9 at wsid on street tyres with only the following mods

trd lsd

new manifold with wrx turbo to suit

full exhaust

fuel reg

fuel pump

dont know bout you guys but for those mods thats pretty dam quick. cheap awesome little car in my opinion

make up your mind? or were u implying there were no aus spec turbos?

yeh I described what I meant 20 mins before you posted... just above this post.

i had a gt starlet years ago.

ran a 12.9 at wsid on street tyres with only the following mods

trd lsd

new manifold with wrx turbo to suit

full exhaust

fuel reg

fuel pump

dont know bout you guys but for those mods thats pretty dam quick. cheap awesome little car in my opinion

that was the $5K I was refering to.

got it from Dale? (10secrx7)

he has/had a upgraed package of:

manifold

TD04

Microtech and tune

and a few other bits.

was under $5K from memory and pretty much gave a power/weight to run a 12.xx

then it was a matter of driver ability and traction.

"When threads turn bad..." haha

I rem when my cousin got me into cars, mid 90's. KE Corolla's, Cordia's, NA Rotary's were the bread&butter. 11sec Sigma turbos would eat you, and in cabin, screwdriver tweaked Microtechs was NASA stuff.

Ahh the good ole pre-adolescent 90's; wet dreams, women and umm... worcestershire sauce.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia body...
    • This. A 3d wheel alignment is like $120...just take it to the shop. Since theres probably multiple adjustments that need to be made after changing something. Mine has front/rear lower arms, traction rods, tension rods, camber arms, toe arms, front upper arms, hicas kit, sway bars and coilovers. I measure from the edge of the bolt holes on the originals and set the same length on all the adjustable stuff to dial it as close as I could to OEM. Took it straight for alignment; it didnt feel right at all...after alignment, it feels perfect. Similarly i've just changed the springs on another car; and I still needed multiple adjustments to bring it back in spec.
    • A full Veilside kitted JZA80 Supra in Meriken park in Kobe city a few weeks back
×
×
  • Create New...