Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...
  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 weeks later...
  • 3 weeks later...

news...

well the guys at hills went to the effort of putting developing a plug in loom extension to swap the pins required for the late s1 stageas. What they didn't get sorted out is some sort of difference between the 34 gtt and late stagea coils which caused the #6 ignition chip to burn out after about 30 min. PFC is off for repairs, then a firmware upgrade to sort that, then we will be back in business. 2-3 weeks probably.

this has been a real saga. I recommend aganist buying a late s1 stagea if you are thinking about modifying it - stick to the early model where everything works ok

  • 2 months later...

bloody hell this thread went on too long!

anyway, I've got the car back with the PFC in and all running beautifully. a hell of a lot of work went into getting it working. the good news is I didn't really pay for the development (just a tune) but that means I can't really share the wiring changes (except to say there are a lot). Mark @ Hills Motorsport finally worked through it all and has developed a piggy back loom so the standard wiring doesn't require modification. Anyone with 9/97-8/98 stagea really should talk to him to get it sorted.

The standard auto ECU was working very poorly with the manual conversion (looks like this is another late series ECU surprise). The late ECUs put heaps of timing in over 4000 when it doesn't get a signal from the ECU (45o at 4500!!) which turned out to be the cause of my pinging problem....I had changed the fuel pump, FPR, air flow meter trying to chase that problem. It also runs very very rich (up to 9.5:1) and to add insult to injury the closed loop (02 sensors) turn off over 2800rpm and 1/4 throttle, no wonder fuel economy was woeful.....PFC has sorted it all out perfectly.

I will work out how to overlay the original dyno graph (130rwkw) with the new one, they are a very interesting comparison

Its now making 175awkw at 13psi....which made the clutch slip so boost is back down to 11psi (155awkw). but most importantly the mid range is very strong, and the initial throttle response 1000-1500rpm is noticeably sharper. top end really runs out of puff though.

mods are:

3" turbo back exhaust

11psi boost (greddy profec b)

manual conversion

r34 power fc with wiring changes

intercooler, injectors, turbo, intake etc are standard.

right now it will stay as is, its taken ages to get it sorted after the manual conversion, and now with the extra power, sydneykid's suspension, interior goodies it is very nice to drive and suits it's job very well (towing, moving the kids around and daily driver). I'm not looking to push it power-wise or anything, it just needed a bit more poke than it used to have.

if the opportunity comes up for the right price I will do:

front mount (it was really quite hot on the dyno even at 11 psi.) personally I don't think the 34 sidemount can make enough difference to be worthwhile, but I've never tested back to back

skyline cams and a cam gear

new clutch

highflow turbo

but I am certainly not in a rush.

not sure yet, I am running the first full tank now. welcome to the difficult ecu club btw.

tangles, I've run remaps for years in the race cars and am very happy with them as well. its just that there are some extra costs for the daughterboard/ecu mods in these cars, and they are a little harder to retune. But I think its a very viable option.

not sure yet, I am running the first full tank now. welcome to the difficult ecu club btw.

tangles, I've run remaps for years in the race cars and am very happy with them as well. its just that there are some extra costs for the daughterboard/ecu mods in these cars, and they are a little harder to retune. But I think its a very viable option.

nice, Im new to turbo's, and I definately suggest a Toshi remap in conjunction with a piggyback such as safc/sitc, emanage ultimate, haltech interceptor etc.

mod chip plate is a cple hundred, chip and tune is the same, plus soldering costs for the mod chip plate bracket holder

mark @ hills is also looking for someone with an auto that wants to run pfc. they have done a lot of work on running pfcs with the auto trans computer and need a stagea to get it sorted out

Got my car back today and it feels totally different!!! Here's the work I had done:

FMIC installed (finally!!!) - GReddy Spec R-HG return feed kit;

PowerFC installed and tuned (finally!!!);

X-Force split front/dump pipe;

X-Force high-flow catalytic converter.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...