Jump to content
SAU Community

Recommended Posts

hi all,

i need some good oil but can't find a local stockist

dose anyone know where i can buy Motul turbolite 4100 10w 40

off the shelf.

i know it can be ordered but i don't have the time to wait for it

The closest so far has been dural *ftw

any help would be great

Edited by Y2K2
Link to comment
https://www.sau.com.au/forums/topic/205667-where-to-buy-motul-4100-10w-40/
Share on other sites

hi all,

i need some good oil but can't find a local stockist

dose anyone know where i can buy Motul turbolite 4100 10w 40

off the shelf.

i know it can be ordered but i don't have the time to wait for it

The closest so far has been dural *ftw

any help would be great

I thought auto barn had some

auto one - chatswood and hornsby are not stockists any more

auto barn - closest is dural

repco - waitara:NO dural:should have

realy can't afford the time off to go get it

any other sugestions

order it from Just jap or somewhere close and get them delivered to y our door?

Where To Buy Motul 4100 10w 40?

Ans: Don't Buy Motul 4100 10w 40

It's only a semi-synthetic

yep. exactly. well I did try to tell him before but clearly he's not keen on the advise. 4100 is a pretty ordinary oil. I certainly wouldn't put it into any of my cars.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...