Jump to content
SAU Community

Recommended Posts

Make: NISSAN

Model: R32 GTS4

Milage: 62k

Transmission: R32 GTR 5 speed gear box

Colour: custom gun metal grey w/ a gold pearl

Location: SA (willing to send interstate)

Complied? YES

RWC supplied? No

Currently registered? Rego'd in QLD until July 08.

Price: 12.9k

Contact: Michael on 0414 398 019 (anytime)

Comments / Modifications:

PROJECT VIDEO: CLICK HERE

Ok guys, Up for sale is my beautiful missus that i have spent all of my money on over the past year. In its previous form i only got 6 drives out of it!!! It of course back then was an RB20 powered 32. thousands and thousands of dollars later it is now almost complete and already up for grabs! :(

It's currently sitting at turbo tune getting the last of the wiring finished so will be ready for its first start up and tune in the next couple of weeks :D

Reason for the project was on my 6th drive of this car it blew up... shortly after buying it last year from a guy in Queensland. Diagnosed it was just a blown head gasket, but workshops wanted approx 1.5k to fix it. So as ya do, i said screw that ill just buy a RB25det for that price and put it in, then it will all be sweet............. sadly thats not how it turned out. :(

I located a very good condition series 2 rb25det sitting in a '96 model stagea front cut with only 62k on the digital cluster. completely bog standard. I sold the standard rb25 turbo with intention to use my GT2540R from my previous rb20 set up. later down the track we found in the blow, bits of spark plug had completely destroyed the rear wheel of the turbine. so that was replaced with a brand spanking new GT2871R turbo with bigger housings from garret. RB20 plenum had to go (dont fit on rb25's), and that was replaced with a brand new Greddy style front feed plenum with a new 80mm throttle body. anyway, i could go on for pages and pages worth of mod stories but ill just list what it has for easier inspection...

RB25DET s2

RB20det GTS4 sump and front diff (shorter ratios than the GTR)

Shimmed rear diff

GTR gear box

NISMO short shifter

NISMO extra heavy duty twin plate clutch (plenty of meat left)

NISMO Flywheel

GTR forged wheels

GTR front bar

recon springs and shocks

BRAND NEW GT2871R (440hp turbo) sourced from ATS

reconditioned S15 480cc injectors.

BRAND NEW just jap radiator

Malpassi 1.7:1 rate fuel pressure regulator

Haltech 3 coil waste spark ignition.

MSD DIS4 CDI ignition using 3 channels, 2 step RPM limiter for anti-lag/launch control.

BRAND NEW Greddy style intake plenum

BRAND NEW 80mm throttle body

Stainless exhaust manifold with GT25 flange welded on.

HKS super dragger exhuast (no cat)

Custom dump

Turbosmart 38mm Street gate, external wastegate.

Screamer pipe

4WD/2WD switch and loom (choose between 2WD or AWD at the flick of a switch)

Haltech external boost control solenoid.

Turbosmart V-port BOV.

Modified standard fuel rail

RB20det Remapped ECU by SPEEDLAB

Full flow oil system and oil filter relocator

Front mounted Oil cooler

DRIFT oil catch can

DRIFT pod filter with custom made intake pipe

Bosch 040 700hp in tank fuel pump.

600x300x75 front mount intercooler.

Various after market Guages

O2 sensor digital guage

Greddy turbo timer

Images:

some pics....

l_e47aecfc39fbc4bd73e4093d2ee04a00.jpg

l_485a92631cfe8ee7cc87220dcc3e79ed.jpg

l_84b934211811dbd45d4f5d76bb9f6117.jpg

l_628baee6bb0e81807ce062bfb4180fde.jpg

l_6ac0cc58fd8bb82d26861d902ba03a5e.jpg

l_bb58c524635c6a4a9b86368ddaf14f6f.jpg

l_f2a53cf50b62da8398730f3175cd1fd4.jpg

l_5bec3c0f0c3241c8010d444741afc12e.jpg

l_d2ed1ee4cc79d14b6a240d520a7896a1.jpg

l_c6b6b1a43db7a2a47d934c2be32fa74c.jpg

l_655b558d62bafa033ad464f8b40d5ec4.jpg

l_044c8daad71fa279c555c661d46cbb59.jpg

l_9b8584fefb13c74fcb71a8c7fcbfeaeb.jpg

l_d0b1a5c573c3ed258844bd992f9b2163.jpg

l_e03d9d9f4b20097aef3db97e1e17fd7d.jpg

l_52317148dea4a3c09b499d77426c4bd1.jpg

l_3af4ebb969433ba75d3d8827c1f884e8.jpg

Edited by zertek

seen the heart break with this thing. unfortunately micky is set to lose a friggin shit load of money from her but thems the breaks with cars

good luck with sale, should be easy sale seeing as paint job is almost worth half of wat your asking for the car

ANOTHER mod for u mike

Paint less than 12 months old

well it only needs to go through cop shop to pass. so it will just involve putting on stock turbo and exhaust for a day. cop shop is heeeeaps more lenient than regency and aslong as all the engine numbers match and pass (i have receipt for the rb25 and still have the origional rb20) and nothing too obvious is sticking out then it will be fine. other than the top mount, nothing else really other than the turbo timer and 2 guages will have to be hidden/removed.

hey buddy real nice car...i also have a gts4 and was thinking i should buy an rb25det from a stagea and put it in mine..just wondering how difficult is it and is there anything i need to look out for..oh and also did the stagea s2 come with the neo engine???

cheers mate and once again thats a real nice car :P

vinnie

hey buddy real nice car...i also have a gts4 and was thinking i should buy an rb25det from a stagea and put it in mine..just wondering how difficult is it and is there anything i need to look out for..oh and also did the stagea s2 come with the neo engine???

cheers mate and once again thats a real nice car :P

vinnie

hey mate, no need. just buy mine :)

Na i got the rb25det from a stagea series 1, but they come with a series 2 rb25. the series 2 stagea come with the NEO. really all ya need to do is swap the front diff ratios to rb20 so all 3 of your diff ratio's match.

  • 2 weeks later...
  • 2 weeks later...

hey for all who are worried about buying the car and coz the plates are regoed in qld and a scared they will have to take it to regency or cop shop.all u have to do is rego the car on the net. i brought my car in qld 2 years ago and i regerested it on the net so ive got my adress on the car from adelaide but still got my queensland plates on it..

its the easy way to miss regency.

car is tuned and running. drove it home yesterday. went for a REALLY conservative tune on 15psi and it easily pumped out 255kw at wheels. sorta come to a swap deal with my mate for a bunch of parts. but if anyone is willing to take it this week at the asked price, then my mate told me to just do that instead.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...