Jump to content
SAU Community

Recommended Posts

Hey guys hope this is the right section

I'm considering purchasing a skyline from Queensland, the car in question is engineered except for the ECU and boost controller.

What am I in for and what is required to get the car over the border? Any help would be great as I'm pretty clueless with these things.

Cheers Steve.

Link to comment
https://www.sau.com.au/forums/topic/206764-bringing-a-car-from-qld-to-nsw/
Share on other sites

fill the boot with drugs and put it in a covered semi!

lol

i bought a car in the ACT recently and im just waiting for ACT rego to run out, then ive gotta get a blueslip and transfer it all into my name and put my custom plates back on it....

but yeah blueslip and normal rego stuff i think...

call the rta they are there to help

We just did it.

Step 1:

Get the rego papers

Step 2:

Get a note from the owner stating their name & address where the car is registered at, sold to one zilch who lives at 102 skyline way, sydney for $xxx amount rego number 589 X97 QLD vin/chassis number. sold on date 19/02/2008 and get them to sign it.

Step 3

bring the car back to NSW

Step 4

Go get a blue slip

Step 5

Go to the RTA give them your

A) Blue slip

B) Change of registration form (you must fill this out at the rta)

C) The note that the old owner has given you

D) Just have the old rego papers on hand

Step 6

Give them lots of monies and you have a NSW registered car. (woo hoo!)

fill the boot with drugs and put it in a covered semi!

lol

i bought a car in the ACT recently and im just waiting for ACT rego to run out, then ive gotta get a blueslip and transfer it all into my name and put my custom plates back on it....

but yeah blueslip and normal rego stuff i think...

call the rta they are there to help

hahaahah this guy..

what you gonna if theres no more drugs n shit left in the world

Thanks heaps for that Corinne :/

I was just unsure of the procedure and yeah the car has a ton of mods but I suppose if they are all engineered it won't matter

Oh and how much did it cost you?

Edited by Zilch*
hahaahah this guy..

what you gonna if theres no more drugs n shit left in the world

love is the drug schneggles..!

blueslips are pretty expensive.. and normally they want you to slap a year of rego on it..

im factoring 1kish for my changeover

Thanks heaps for that Corinne :/

I was just unsure of the procedure and yeah the car has a ton of mods but I suppose if they are all engineered it won't matter

Oh and how much did it cost you?

It depends..

It will cost you the

* Blue slip

* Green slip I forgot to mention you need one of these

* Transfer of rego fee which is certain percent of the car it all varies

* and of course the full 12 months rego.

Cost some big bucks because you have to put 12 new rego on it.

But then you won't have to worry about it running out.

The QLD engineering stuff doesn't mean squat to NSW they don't reconise it.

We just did it.

Step 1:

Get the rego papers

Step 2:

Get a note from the owner stating their name & address where the car is registered at, sold to one zilch who lives at 102 skyline way, sydney for $xxx amount rego number 589 X97 QLD vin/chassis number. sold on date 19/02/2008 and get them to sign it.

Step 3

bring the car back to NSW

Step 4

Go get a blue slip

Step 5

Go to the RTA give them your

A) Blue slip

B) Change of registration form (you must fill this out at the rta)

C) The note that the old owner has given you

D) Just have the old rego papers on hand

Step 6

Give them lots of monies and you have a NSW registered car. (woo hoo!)

Hey Corinne,

What car did you bring over?

I just did this with my V35 and went as above, except before I handed over the monies I had to take the car through a random "ID Check".

If the car has rego it's no big deal as you can still drive it while waiting for the ID check but not sure if they check other things like mods while doing the "ID Check" mine was pretty standard, with only exhaust and Nismo suspension.

As for driving down, definately do it. I bought my car from Noosa and had a truck waiting in Brisbane. An hour into the drive from Noosa, I cancelled the truck called the Mrs and said, see you tomorrow.

I also got a nice souvenier from the Queensland police about a week ago (I bought it in December), a pic of my car passing a nice Torana photographed by our friendly speed cameras. :-) And a nice close up as well. I think you can see my smile in the pic. I'm getting it framed as i type.

Hey Corinne,

What car did you bring over?

I just did this with my V35 and went as above, except before I handed over the monies I had to take the car through a random "ID Check".

If the car has rego it's no big deal as you can still drive it while waiting for the ID check but not sure if they check other things like mods while doing the "ID Check" mine was pretty standard, with only exhaust and Nismo suspension.

As for driving down, definately do it. I bought my car from Noosa and had a truck waiting in Brisbane. An hour into the drive from Noosa, I cancelled the truck called the Mrs and said, see you tomorrow.

I also got a nice souvenier from the Queensland police about a week ago (I bought it in December), a pic of my car passing a nice Torana photographed by our friendly speed cameras. :-) And a nice close up as well. I think you can see my smile in the pic. I'm getting it framed as i type.

We bought a vs commonwhore & my bike down.

That random ID check IS BADDD make sure the car is completely stock when it goes for it.

We bought a vs commonwhore & my bike down.

That random ID check IS BADDD make sure the car is completely stock when it goes for it.

exactly - I thought I would be rejected but in the end i passed first go with my V35 even though I had the exhaust and suspension.

I got through nice and easy when I imported my first V35, but I think it could be cause the V35's are newer NON turbo they may be a little more leanient on them

exactly - I thought I would be rejected but in the end i passed first go with my V35 even though I had the exhaust and suspension.

I got through nice and easy when I imported my first V35, but I think it could be cause the V35's are newer NON turbo they may be a little more leanient on them

Hmm. Well when we went to get a blue slip for the GTR the place on parra road didn't want to do it because it wasn't standard and if we had to have a ID check done they would have fined the dealership doing the blue slip.. We just said we had all the spare parts and home (which we did) and if we were called to book it in we would change it back the day before. Had the blueslip done and lucky the RTA didn't check it.

I doubt they would make me do it for the bike. I still have the thing on QLD rego until I get a bit of money to re-rego it.

thats the same with me...

your MEANT to transfer it right away, but my car still had like 6 months rego on it, and the dealer slapped in my name already so when i had the funds (now) ill do it... (runs out on 28th.. lol)

but you can get in trouble for not doing it asap.. and get taken to court (sif thats going to happen)

thats the same with me...

your MEANT to transfer it right away, but my car still had like 6 months rego on it, and the dealer slapped in my name already so when i had the funds (now) ill do it... (runs out on 28th.. lol)

It's shit hey Haysey! It's a waste of money not to let the bloody rego run out. Because unlike NSW if you buy a car from another state that money goes back to the old owner. Load of crap I tell you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...