Jump to content
SAU Community

Recommended Posts

Variuos parts

Series 1

used

Price see below

To Fit: (What car)

Wollongong

Paul 0432171482

Prefer pick up

dscf2555sq3.jpg

As you can see i got some bits left over from a half cut i bought. There's more parts coming very soon. I need to move some bikes to get to the car parts. I have no idea what these parts are worth, so you either get offended or a bargain.

Front struts, used torn rubbers, but are straight $250/pair

Front upper control arms $60/pair

Raduis rods $50/pair

Raduis rod bracket $45/pair

Wiper motor $25

I have more parts coming very soon. I prefer pick up. Cheers. Open to offers if this stuff is too dear.

Link to comment
https://www.sau.com.au/forums/topic/206799-r33-parts-for-sale/
Share on other sites

  • 2 months later...

driversguarddy9.jpg

Driver guard from a R33 series 1 with some transport damage as shown.

passguardtr4.jpg

Passenger guard from the same car, also has some transport damage as shown.

I need to get rid of all my skyline parts as shown in this thread asap. I can post, but it will involve some packing and you'll need to organise a courier from your end. I live near a panel beater so i should be able to get some boxes for the guard(s).

Make an offer on the lot. Call me on 0432171482.

  • 5 weeks later...
  • 2 months later...

Apart from the power steering pump and the struts the rest is up for grabs for nothing.

Someone come and clear this junk for free! I'm sure there's more stuff in the shed that I don't need.

Pick up only...First in best dressed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...