Jump to content
SAU Community

Recommended Posts

mine is sorta resting on the bottom of the tank which makes it louder, when the fuel gets hot on a hot day you can really hear it outside the car, buzzing its ass off. it'll be fine mate. FWIW the walbro pumps are quieter but who cares when you got a decent exhaust anyway

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665270
Share on other sites

it is pretty loud, but not unbearable.

yea they are supposedly rated to 400hp. they are only loud when priming, and i can only just hear it on idle when i blip the throttle when the stereo is off.

but overall it gives great bang for buck.

5/5

but 3/5 for its power capability

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665277
Share on other sites

Ive had issues with mine, and am taking it back to the workshop to try a different pump as i have had starting issues ever since installing the 040. it holds fuel pressure fine though and has no trouble holding sub 12 afr's on full boost, but starting the car sometimes sucks!

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665281
Share on other sites

If i can only 'just' hear it at idle i can live with that. Anything more though and i'd probably get pissd.

Hey! I hope i don't get starting issues. My mate has one and recommends it, never had starting issues. Did you install it yourself and stuff it up? Hehe

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665298
Share on other sites

yea mate....seriously all u will hear is a buzz and hiss on priming.

and other than that u cant hear it.

i only heard it because i was REALLY listening for it.

but its not like 90db or anything..

no one will be like , WTF IS WRONG WITH YOUR CAR DUDE.

lol

Edited by r33cruiser
Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665306
Share on other sites

I got one for my R32 GTR, but swapped it and another $200 for a sard. The 040 didnt fit into the nicely engineered cradle, so i would have lost fuel pickup depth and sound/vibration isolation if i had used it. The car already surges on 1/4 tank at the track... For GTS-T YMMV.

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3667029
Share on other sites

Bought it today from CRD. Will be fitting it over the weekend. I'll post comments if anything interesting happens.

I got one for my R32 GTR, but swapped it and another $200 for a sard. The 040 didnt fit into the nicely engineered cradle, so i would have lost fuel pickup depth and sound/vibration isolation if i had used it. The car already surges on 1/4 tank at the track... For GTS-T YMMV.

I agree with you, the gtst will never surge like a GTR so i think it should be fine. Plus my car won't see the track that much.

The nismo 275lph pump comes with its own cradle and touches the very bottom of the tank.

It shits all over any bosch.

Oh, and its quiet - I can't hear it at all.

You're right but for half the price i think it's a good compromise.

na didn't install myself had it done professionally by a workshop then checked by another workshop as i was sceptical of the install and they have said it was installed fine

Ok dude, you're a mix between paranoid and OCD. :P

Nismo bolt ins, are for gurls :banana: lol

For the cost of em, you'd want them to be quiet (undoubtedly they use a fuel resistant insulation, like factory)

Lol. I'll agree with that one, only cause it makes me look tougher ;)

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3667558
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...