Jump to content
SAU Community

Who remembers nicoles bf from MAS

JET-33

By JET-33,
in Victoria

 Share

Recommended Posts

JET-33 Grand Master

JET-33

Posted
  • Author
Posted

mate, i havent done anything, havent kissed her or anything...so there u go

it was a serious threat....but its not like i havnt been in the boat of being threatened b4....cos u all know what im like when it comes to some 1 have1 a go at me...

yeh im in the right and have done nothin wrong....but people r people and some r dummer than others..such is life

JET-33 Grand Master

JET-33

Posted
  • Author
Posted

its pushed 396 :)

i had 1 turbo drop back to .5 bar instead of 2 at 1.6, car was wheel spinning with 6 people in it at 5500rpm and we still managed 350 on pump fuel :(

anywayz...they werent gettin along when he came in on saunday to mas, so he made her leave early, she told me monday they had a fight and it was ova, she broke it off with him...and yeh, u should b able to c how its my fault...riiiittteeeee

Guest 180sx_nissan_guru

Guest 180sx_nissan_guru

Posted
Posted

i say take leewahs ride, and roll over that ****er, slice him into bits.

what did it do on the MAS dynos? 463kw? yeah that that ****er and run him over :) personally, i would track him down and pipebomb his house ;) i can make em if ya want lol just call me hahahahaahaha :)

Tweak :(

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...