Jump to content
SAU Community

Recommended Posts

I was wondering what everyone else's opinion is, recently I have pondering the thought of selling my S1 R33 GTS25-t & purchasing a MY00 or MY99 WRX.

The reasoning behind my madness is that I would like a 4 door 4WD car that would be a quick point to point machine, I don't want to do any serious mods to the rex just the basic stuff like exhaust, PFC & maybe larger top mount intercooler. My skyline currently at the moment has 3" exhaust, FMIC & boost controller. I also have a 400R front bar which leads to other thinking of making a swap, I recently cracked the front bar which is the second I have trashed & I'm just so over this fibreglass crap & would rather standard plastic bumpers, the S1 bumper looks crappy IMO & to get a gen GTR front bar will cost a mint. which brings me back to the rex, I'm basically after a fun daily driver that is sprinty, excellent on the tight twisty mountain roads, does not take forever to wind up & get going & at the end of the day can be a easy car to live with day in & day out. I'm not really into massive horsepower, big numbers & huge top end just more interested in torque & drivability.

And before anyone says get an STI or EVO I would be looking at a max budget of 17k to spend on the rex.

Any advice would be great guys cheers.

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Ok well let me start by saying the WRX is great for all those things you listed. From what i know there arent that many problems with the rexes..the only downfall i guess is the security system. In a way its good because it is definitely a quality system, but if you disconnect the battery, or the battery goes flat it becomes a real pain.

i guess its up to you tho mate...are you ready for AWD...or are you still enjoying rear wheel?

RWD are fun & have good handling characteristics but it's not like that I get the chance to step the arse end out everywhere on the roads. I like the idea of grip and traction in all sorts of adverse conditions... In saying that I wonder about how bad the low end torque is on a rex, some ppl say its really really doughy, I wonder with a few light mods would sort that issue out? IMO I think that the R33 take a little to wind up and get going.

Ok well let me start by saying the WRX is great for all those things you listed. From what i know there arent that many problems with the rexes..the only downfall i guess is the security system. In a way its good because it is definitely a quality system, but if you disconnect the battery, or the battery goes flat it becomes a real pain.

i guess its up to you tho mate...are you ready for AWD...or are you still enjoying rear wheel?

I have a 2003 bugeye trust me a standard wrx is nothing special at all. They are slow and need quite abit of money spent on the to get them going.

TMIC $1000

Exhaust $1000

Injectors $800

TD05 16g turbo $1400

Initial tune on stock ecu $1000

might need a fuel pump $500

+ labour

+ 2 - 3 hours on the dyno $500 - $750

+My brand new turbo is fault so add extra costs to get that replaced.

Expecting 280hp at all 4's running around 1.4bar of boost.

With this new power i will probably need a new clutch soon.

hopefully gearbox will last as im capping it at 280hp so i dont need to buy a replacement

if you have your heats set on a wrx go buy an old sti money would be better spent there

If you keep the stock Turbo on the rex (TD04), you will not have lag.

it will be slightly doughy compared to the RB25 at revs below 2500rpm, but still, it's not as bad as you'd think.

the downside of the stock turbo is, the max power you will make is about 150-160awkw at most.

and that will be at boosts of around 18psi.

(all of the above figures are once tuned with the PFC as you said)

some work on suspension and antisway bars and anti lift kits etc will have the rex handling pretty good in the situations you talk about.

AND, keeping the stock turbo with that sort of power, and using a NON BUTTON clutch, will have the gearbox stay in one piece even after hard launches as there is always some slip in non button clutches...

an STI top mount IC would be pretty good.

and while it is off, upgrade the "Y" pipe (turbo to intercooler pipe) to an STI aluminium item or an aftermarket Silicon one.

You could also invest in an STI IC water spray kit.

Don't lower the car any more than say 1-1.5 inches and you won't hit anything, you don't get hassled, you won't ruin the handling.

if you do decide to upgrade turbo, cheapest option is a TD05, this turbo on same mods as above and same boost will bring power close to 180awkw and not too much lag.. maybe 400-500rpm extra.

other than that, the turbo upgrades get expensive.

many in the VF range to choose from like the STI stock turbo and most peoples favourite VF34.

The EJ engines are pretty reliable.

Mine has 323,000kms on it. (was rebuilt about 50,000kms ago due to the previous owner doing alot of long distance trips and wanted peace of mind.)

I think you'll enjoy the change from rwd to 4wd and 2 door to 4 door.

Very important.!!!

Do not buy an exhaust with a cannon muffler.

do not buy an exhaust that DOESN'T have a centre muffler.

these things can really Drone is the exhaust isn't done right.

My one keeps it's mouth shut as I have a factory STI muffler bolted to the rear.

flows plenty but is almost factory quiet.

If you keep the stock Turbo on the rex (TD04), you will not have lag.

it will be slightly doughy compared to the RB25 at revs below 2500rpm, but still, it's not as bad as you'd think.

the downside of the stock turbo is, the max power you will make is about 150-160awkw at most.

and that will be at boosts of around 18psi.

(all of the above figures are once tuned with the PFC as you said)

some work on suspension and antisway bars and anti lift kits etc will have the rex handling pretty good in the situations you talk about.

AND, keeping the stock turbo with that sort of power, and using a NON BUTTON clutch, will have the gearbox stay in one piece even after hard launches as there is always some slip in non button clutches...

an STI top mount IC would be pretty good.

and while it is off, upgrade the "Y" pipe (turbo to intercooler pipe) to an STI aluminium item or an aftermarket Silicon one.

You could also invest in an STI IC water spray kit.

Don't lower the car any more than say 1-1.5 inches and you won't hit anything, you don't get hassled, you won't ruin the handling.

if you do decide to upgrade turbo, cheapest option is a TD05, this turbo on same mods as above and same boost will bring power close to 180awkw and not too much lag.. maybe 400-500rpm extra.

other than that, the turbo upgrades get expensive.

many in the VF range to choose from like the STI stock turbo and most peoples favourite VF34.

The EJ engines are pretty reliable.

Mine has 323,000kms on it. (was rebuilt about 50,000kms ago due to the previous owner doing alot of long distance trips and wanted peace of mind.)

I think you'll enjoy the change from rwd to 4wd and 2 door to 4 door.

Very important.!!!

Do not buy an exhaust with a cannon muffler.

do not buy an exhaust that DOESN'T have a centre muffler.

these things can really Drone is the exhaust isn't done right.

My one keeps it's mouth shut as I have a factory STI muffler bolted to the rear.

flows plenty but is almost factory quiet.

Cheers for that advice, I'm wouldn't be to keen in upgrading the turbo, I would much rather spend the money on suspension & brakes as I still want as much throttle response as possible... With the doughy low end of the rexies would a lightened flywheel and light weight pulley kit help sort this issue out?

Upgrade the turbo :D max power on stock turbo is very dissapointing

I hardly notice lag difference between the td04 and td05.

Dont bother putting an aftermarket ecu in it get the stock one reflashed

Upgrade the turbo :) max power on stock turbo is very dissapointing

I hardly notice lag difference between the td04 and td05.

Dont bother putting an aftermarket ecu in it get the stock one reflashed

I like the idea of having flexible tunability of the ECU hence why I would go PFC. Putting max power aside, what is the drivability between the 2 turbos?

couple of hundred extra RPM between stock and td05. in terms of coming on to boost that is.

then the TD05 has a greater midrange, and greater top end.

nothing stoping you from getting the best from the tdo4 first though.. except the cost of 2 tunes.

Brakes are already 4 piston and about 300mm discs.

good pads and good fluid would be a good place to start, and not too expensive.

Don't do the ecu flash thing.

well unless more places other than MRT do it these days.

PFC would also be my choice.

Edited by GTST

only downfall is working on the prick boxer engines, wouldn't matter if you don't spin your own spanners, but dam, plus you couldn't show your mates your engine bay, because it looks like one big brothel.

my00 is the pick if you want the best looking shape, albeit dated looking now, but it also got the 4 pot brakes plus the other little things the early pov pack wrxs lacked.

they would honestly have to be starting to date by now, unless you can find a well looked after low km model.

r33 would technically be the better car and better built in most areas, especially chassis wise (early wrx are shit in this area), but i have seen some abortions of r33 as well.

what about an older-model audi S4? does that fit into your price bracket?

AWD + TT V6 sounds like a bag of fun and in a classy package that is very easy to live with everyday..

Leather clad recaros.. twin turbos that hit full boost at 1800rpm, cops dont look twice.. better build quality, and they were a $130,000 car new which can be picked up cheap now...

IMO Driving an S4 is like having a big dick, no one knows you've got it, untill you use it... then not much needs to be explained afterwards...

You know I have both my GT-R and a WRX (MY03 Hatch) which is my daily. And the WRX is nice but for me it just doesn't feel like a car I want to modify. And in many ways thats a good thing. The only thing I've ever thought of doing was chucking some handling mods at it but even then I've resisted and so after owning it for over 4 years it's still 100% stock. But it does the trick as its nice to drive every day but it is still ok fun if I decide to give it a bit.

However - its much easier for me as if I do want a real lot of fun I've always got the GT-R to jump into. But I do think they are almost a better car left standard.

If you're tall don't get a rex they're hell to get in and out of and the seating position is weird. They have heaps of mechanical issues and hard to work on, I liked they're exhaust note originally but since every person with a rex has an aftermarket exhaust, I'm tired of the sound of them, they are the main reasons I've stayed away.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...