Jump to content
SAU Community

Recommended Posts

thought this would be a good idea :D

if you have a part number for a commonly failing/modded part list it below.

(I'll update this post to reflect it - saves digging.)

Part number ------------- Part -------- Desc.

80501-AM80A -> left side door catch assembly - coupe. includes cables and door lock actuator.

80500-AM81A -> right side door catch assembly - coupe. includes cables and door lock actuator.

80731-CD00A ->Passenger side (LHS) window motor + regulator- coupe

B61F0-AL500 -> Clear front indicator lenses for Sedan

H0564-C9922 -> Master key blank:note that this is the key with lock/unlock button in handle, no boot release on key

Edited by Chris Rogers

passenger side (LHS) window motor + regulator

part no: 80731-CD00A

this needs to be changed if your window is intermittantly not working and the door needs to be tapped or closed hard in order for the window to work

when you change the motor, you have to re-set the window motor so it knows where the top is:

- take the door trim off

- close the door and sit inside the car (the door needs to be closed as there is a sensor)

- peel back the black sticker almost right in the middle of the door to reveal the reset button

- close the window completely

- press and hold the button

- open the window manually (using the first click not the second click)

- when the window has fully opened release the switch then release the button

- check that the auto-up now works!

this re-set procedure is also useful if your window has the issue of winding half-way down after it hits the top

cheers,

Warren

Door Lock actuators for V35 Coupe:

I have just recieved today from Japan the lock actuators. It seems like Nissan has changed the design somewhat - it's not apparent from the outside and created new part numbers. Here is the verbatim text from my contact in Japan:

> Parts number has been changed.

> V35 Nissan Skyline

> 80500-AM813 -> 80500-AM81A

> 80501-AM813 -> 80501-AM81A

He confirmed the initial part numbers from my VIN and the revised numbers are exactly what Nissan NZ had told me - they wanted over twice the cost I paid though.. I've fitted the RHS one and I'm sorry but this late at night I cant tell which is the left or right - you should order both anyway! I'll create a seperate thread with contact details for the Japanese guy - he was really good to deal with.

Hope this helps someone....

most car might have flat / dead battery from sitting in the docks for too long.

Found a good replacement Century Battery NS60LS

Blue colour has flat top (no yellow cover sticking out) and has 2 terminal sizes, use the small ones and keep the rubber cover on the large terminals on.

Dimension lengthxwidth (23cmx13cm) very similar to the old battery except it is 1cm shorter (18cm only), so you'll have to screw down the bracket holder tighter until it reaches the lower battery height and keep it down. Alternatively put a 1cm thick spacer under the battery either a solid hardwood or hard rubber to get the battery to the correct height.

About 400 CCA (Cold Crank Amps), cost $159 at Autobarn or $144 with Century promo of $15 cash back for trading in any of your old battery (they'll recycle it). It's probably cost less if I look harder but what the heck, it's Labour Day holiday and I can't be bother driving around town to find cheapest price, just wanted to get it done.

  • 3 weeks later...

Not sure if this counts as a commonly failing part, but it seems to be a common mod:

- Clear front indicator lenses for Sedan: B61F0-AL500

Again not really a failure part but if your (2001 - mid 2003 I think?) car arrives from Japan with only 1 key:

- Master key blank: H0564-C9922, note that this is the key with lock/unlock button in handle, no boot release on key. So I think this only applies to the pre-facelift 2001 - mid 2003 models only with the 'doggy door' boot (the ones which have the boot open button on the boot itself)

somewhat off-topic so please delete if inappropriate: are 350gt reliable/quality-built/made of quality parts?

It seems it has many common parts that fail. and replacing those parts won't be as easy and cheap as it probably needs to be imported from japan.

thank you

not to be rude - part numbers only please. I'm tryting to make a list of parts that break/wearout out are modded easily.

bear in mind some of these cars are 6-7 yrs old now and some things do break over time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...