Jump to content
SAU Community

Recommended Posts

Hey all,

Well, I've just received my Skyline and have been crusing around of late, showing off my new baby to friends and family etc. The only problem though, is that I seem to be having a problem negotiating steep driveways. I've only had my car for a week, and my bumper is already horribly scratched.

Fortunately I'm not too concerned as yet, as I'm getting the front bumper sprayed soon, but what should I do in future?

My car is a R33 with the standard M spec kit. It's sits slightly lower on a set of non-adjustable set of Teins, but still it's nothing ridiculous.

May I ask, has anyone else had this problem? My driveway is kinda steep, and I have already scratched it a couple of times regardless of how slow I go. Is there anything I can do?

Any comments will be greatly appreciated. Thanks!

man you should see the bottom of my front bar, sure its pretty scratched up but you cant really see anything much unless you take it off ( i did last night and actually felt pain when i looked at all of them) as long as you dont crack it or snap it off completely by flying up a almost vertical driveway at high speed, dont stress yourself about it.

Dude who owned my car last had the front bumper reinforced with fiberglass along the inner edge at the bottom at the front. Mine scrapes on my drive if I dont take it at a sharp angle. With the reinforcing, I have belted a man hole cover that was sitting up and it saved the front bar from being completely ripped off.

ive had this problem before. 10metres before the driveway, i used to drive a bit on the wrong side of the road and go in on about a 30deg. angle. i had heaps of space either side of the driveway so i was sorta lucky and it was the layback kinda kerb. hope this helps :D

I have the same problem. I called the council 4 time b4 they sent someone out (my driveway is fcuked). The first time I called I told them I was happy to pay for the drive if it needed to b redone. But now they can shove it.

Hey Guys, thanks for the replies.

Jimbo2000, yeah, I know, its pretty much unnoticable, but I'm going to get my front bar resprayed, so yeah, all psychological i think.

Bl4cK32, reinforced bumpers ay.......hmm, if I only knew where it could be done. Would be a great idea though.

rb25, i see what you mean by doing a sweeping turn to go into your driveway, but I don't get how that stops the scraping, can you please possibly advise further? I guess my problem is that I live in a court also.......doesnt help does it! :D

Evil, yeah, get the council to pay it........that's what they're there for right!

Just take any driveway sideways!!! :D Best advice I can give!! Sometimes you'll scrape the bar, sometimes you'll be lucky!

I learnt this when my b/f had his walkinshaw and had to go over anything and everything sideways! And then he gets into my car which is at least 2 inches higher, and scrapes the side of my front bar....not happy Jan!!

heheehe my front bar is damaged and absolutely farked ... in fact theres nothing holding it on 1 side cause that sides damaged hehee and at the bottom its cracked cause i went over something which i should have ... i'm getting it all fixed next week .. woo hoo :D but after u learn ur car u know what u can and can't do ... takes a bit of time to get used to driving around being careful all the time ..

My driveway is horrible

My current place the Cat scrapes on the gutter when leaving.. (not that it worries me)

My mums place is worst, I have to reverse in after carefully placing bricks on the lip of the driveway. I think I will have to get creative with the cement one day.

My Driveway is farked.

I have to park on my property at night and my car ALWAYS scrapes, if i turn left into my driveway and reverse left out of my driveway it scrapes a bit. but if i enter my driveway from the right or exit it turning to the right i rip my whole front bar off ;)

oh well... ;)

Shane, yeah, thats the same as me.... I scrape going down a slope, not up..... I think its the fact that when you go up a slope you can get one of the front wheels to start climbing and lift the bar up... but when you go down its hard to get one wheel onto the bottom of the driveway no matter what freaking angle I go on!!!

Scotty - living in a cul-de-sac head doesnt help, but taking the kerb on the angle works well. the more 'parallel' you can get with the kerb the better. keep the angle to a minimum, you might have to get right over the other side of the road, but it aint a problem if you live in a cul-de-sac. get one of your mates to try it and you'll see how the bar gets up without scraping. ;)

cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...