Jump to content
SAU Community

Recommended Posts

Hey all,

Well, I've just received my Skyline and have been crusing around of late, showing off my new baby to friends and family etc. The only problem though, is that I seem to be having a problem negotiating steep driveways. I've only had my car for a week, and my bumper is already horribly scratched.

Fortunately I'm not too concerned as yet, as I'm getting the front bumper sprayed soon, but what should I do in future?

My car is a R33 with the standard M spec kit. It's sits slightly lower on a set of non-adjustable set of Teins, but still it's nothing ridiculous.

May I ask, has anyone else had this problem? My driveway is kinda steep, and I have already scratched it a couple of times regardless of how slow I go. Is there anything I can do?

Any comments will be greatly appreciated. Thanks!

man you should see the bottom of my front bar, sure its pretty scratched up but you cant really see anything much unless you take it off ( i did last night and actually felt pain when i looked at all of them) as long as you dont crack it or snap it off completely by flying up a almost vertical driveway at high speed, dont stress yourself about it.

Dude who owned my car last had the front bumper reinforced with fiberglass along the inner edge at the bottom at the front. Mine scrapes on my drive if I dont take it at a sharp angle. With the reinforcing, I have belted a man hole cover that was sitting up and it saved the front bar from being completely ripped off.

ive had this problem before. 10metres before the driveway, i used to drive a bit on the wrong side of the road and go in on about a 30deg. angle. i had heaps of space either side of the driveway so i was sorta lucky and it was the layback kinda kerb. hope this helps :D

I have the same problem. I called the council 4 time b4 they sent someone out (my driveway is fcuked). The first time I called I told them I was happy to pay for the drive if it needed to b redone. But now they can shove it.

Hey Guys, thanks for the replies.

Jimbo2000, yeah, I know, its pretty much unnoticable, but I'm going to get my front bar resprayed, so yeah, all psychological i think.

Bl4cK32, reinforced bumpers ay.......hmm, if I only knew where it could be done. Would be a great idea though.

rb25, i see what you mean by doing a sweeping turn to go into your driveway, but I don't get how that stops the scraping, can you please possibly advise further? I guess my problem is that I live in a court also.......doesnt help does it! :D

Evil, yeah, get the council to pay it........that's what they're there for right!

Just take any driveway sideways!!! :D Best advice I can give!! Sometimes you'll scrape the bar, sometimes you'll be lucky!

I learnt this when my b/f had his walkinshaw and had to go over anything and everything sideways! And then he gets into my car which is at least 2 inches higher, and scrapes the side of my front bar....not happy Jan!!

heheehe my front bar is damaged and absolutely farked ... in fact theres nothing holding it on 1 side cause that sides damaged hehee and at the bottom its cracked cause i went over something which i should have ... i'm getting it all fixed next week .. woo hoo :D but after u learn ur car u know what u can and can't do ... takes a bit of time to get used to driving around being careful all the time ..

My driveway is horrible

My current place the Cat scrapes on the gutter when leaving.. (not that it worries me)

My mums place is worst, I have to reverse in after carefully placing bricks on the lip of the driveway. I think I will have to get creative with the cement one day.

My Driveway is farked.

I have to park on my property at night and my car ALWAYS scrapes, if i turn left into my driveway and reverse left out of my driveway it scrapes a bit. but if i enter my driveway from the right or exit it turning to the right i rip my whole front bar off ;)

oh well... ;)

Shane, yeah, thats the same as me.... I scrape going down a slope, not up..... I think its the fact that when you go up a slope you can get one of the front wheels to start climbing and lift the bar up... but when you go down its hard to get one wheel onto the bottom of the driveway no matter what freaking angle I go on!!!

Scotty - living in a cul-de-sac head doesnt help, but taking the kerb on the angle works well. the more 'parallel' you can get with the kerb the better. keep the angle to a minimum, you might have to get right over the other side of the road, but it aint a problem if you live in a cul-de-sac. get one of your mates to try it and you'll see how the bar gets up without scraping. ;)

cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...