Jump to content
SAU Community

Recommended Posts

HI guys, I will be getting my HKS GT2835 Pro S soon, just wondering, for the people that have it, does it still have that nice spool jet sound that the standard turbo provides?

You'd think it would be louder since it's a bigger turbo, am I correct???

I would hate to have it installed and it makes minimal spool noise, Id be heart broken! lol :)

cheers

And what about the flutter, I love my flutter... Will the flutter be louder than the standard turbz? I should be, bigger turbo yeh?

I would suggest a Recirculating BOV, as it will make your turbo last longer.

Also, sounds like you want attention?

Cops will love you.

This one is better:

http://users.on.net/sau/pacey.avi

Port shrouded is a "windowed" compressor cover

Looks like this:

Lol, still dont get what you mean, that just looks like a normal turbo to be that dont have a filter and not connected to the cooler...

ps. your vid didnt work :)

I would suggest a Recirculating BOV, as it will make your turbo last longer.

Also, sounds like you want attention?

Cops will love you.

F#$k recuirculating, I just wanna hear that biatch flutter.... Took of the plumb back stocky BOV, flutters real good.

So will the HKS GT2835 Pro S Flutter louder?

ANd also, will the HKS GT2835 Pro S turbz maker the spool sound yours did?

CHeers

spool will be louder than stock as the wheel is steel, your pushing much more air, and running a pod (no doubt)

all these things will make it a fair bit louder.

My old GT30 sounded like an aircraft once i plumbed the gate up :)

i've got a link for my vid somewhere, but you cant hear a lot over screamer pipes :)

This one is better:

http://users.on.net/sau/pacey.avi

Port shrouded is a "windowed" compressor cover

Looks like this:

Im about to bolt on one of those,external gate though :)

F#$k recuirculating, I just wanna hear that biatch flutter.... Took of the plumb back stocky BOV, flutters real good.

So will the HKS GT2835 Pro S Flutter louder?

ANd also, will the HKS GT2835 Pro S turbz maker the spool sound yours did?

CHeers

You dont want it to "flutter" your turbo wont last long.

lancers have mad flutterz and spool noise. Buy a lancer and its a straight fit for a triton diesel turbo to go on. Will be faster, be more cuztom, and flutter way more.

You dont deserve a nissan

Vid please! What were the specs of that motor?

ok... found it Click me!!!

GT30, 45mm gate, Nismo (factory GTS-R) manifold, RB25 (built), factory head/cams :down:

24psi/104 sunoco, thats the major stuff anyhow

ok... found it Click me!!!

GT30, 45mm gate, Nismo (factory GTS-R) manifold, RB25 (built), factory head/cams :down:

24psi/104 sunoco, thats the major stuff anyhow

GT3040?

Guest
This topic is now closed to further replies.


  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...