Jump to content
SAU Community

Recommended Posts

I'm getting ready to go look at a GTS-T R32 Type M. I'm not sure if the motor is worth it, cause it seems you have to put a lot of money into the engine to make some good numbers. Plus im going to have to take a big loan and have payments, so I wouldn't be able to do anything major soon.

Link to comment
https://www.sau.com.au/forums/topic/208067-rb20det-worth-it/
Share on other sites

Well... any motor that you want to make more power - will cost money.

Whats the budget? If you cant afford to EASILY make repayments - you shouldn't be purchasing a skyline.

I don't understand what your getting at here really.

R32's are lighter and cheaper than R33's, hence RB20. R33's are more, hence heavier and RB25 come with them.

RB20/R32 isn't a bad car for what it is, but its aging, 15+ years now

Well... any motor that you want to make more power - will cost money.

Whats the budget? If you cant afford to EASILY make repayments - you shouldn't be purchasing a skyline.

I don't understand what your getting at here really.

R32's are lighter and cheaper than R33's, hence RB20. R33's are more, hence heavier and RB25 come with them.

RB20/R32 isn't a bad car for what it is, but its aging, 15+ years now

Isnt it only about 50odd kg?

Stick with your Turbo Civic for now and keep saving. If your after speed, then the Civic will whoop the Skyline hands down.

Sae up, get a Skyline, model preffered, then spend some money on it. Could even buy a nana spec R32 and RB25 it? Im still relatively new so i dont know if thats an easy/cheap/worth it option. :down:

I haven't built my engine or anything thou. I'm only running bout 8psi. I raced one of my buddies wrx's and he is close to 280hp, and I stayed right with him. Idk I was wondering if I should wait for a skylline with the twin turbo. Insurance thou?

i rekon u would be disappointed with the r32 rb20. Id either keep saving for the gtr or get the r33 rb25 as its easier to get power out of than the rb20, unless ofcourse u like the look of the r32 like me

Isnt it only about 50odd kg?

Stick with your Turbo Civic for now and keep saving. If your after speed, then the Civic will whoop the Skyline hands down.

Sae up, get a Skyline, model preffered, then spend some money on it. Could even buy a nana spec R32 and RB25 it? Im still relatively new so i dont know if thats an easy/cheap/worth it option. :laugh:

Weight is R32 1260/80 (earlier 32's/later 32's) vs R33 1400+ so its around the 120 mark or a tad more. Dunno why everyone gets different specs but those are the ones from factory.

The civic is a light car, with an alrite motor, however as you say, an R32 with an RB25 in it would have a truckload more torque available at lower rpm than all honda engines (stock for stock). Even a 20 probably has more torque at lower RPM than most honda engines stock for stock. Id rather an R32 RB20DET than a honda but thats just my preferance...Horses for courses

Weight is R32 1260/80 (earlier 32's/later 32's) vs R33 1400+ so its around the 120 mark or a tad more. Dunno why everyone gets different specs but those are the ones from factory.

Proof please..

show me the nissan factory information of the above weights?

I've always known it to be:

R32 early = 1290kg

R32 late = 1320kg

R33 gtst = 1370kg

According to Carizma

Curb weight for R32: 1480kg

http://carizma.com.au/Pages/Details%20-%20...e%20-%20R32.htm

Curb weight for R33: 1530kg

http://carizma.com.au/Pages/Details%20-%20...e%20-%20R33.htm

Doesn't sound right to me..

According to Autospeed R32: http://autospeed.com/cms/A_0853/article.html?popularArticle

This backs up what GTST said

The GTS-t is notably lighter than its AWD counterparts (1320kg versus up to 1480kg).

According to Autospeed R33: http://autospeed.com/cms/A_1105/article.html?popularArticle

On the road, the R33 GTS25T coupe's 1360kg kerb mass is apparent.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...