Jump to content
SAU Community

Recommended Posts

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

yeh must of hard a thrashing.... like i can push more boost into it but its the fuel that is totally anal and we all know the stock AFM is as helpful as cancer....

i was just devo'd like omg lol.....

steve said new injectors, ECU and fuel pump should b fine. i should make 200-220kws atleast. and im goin to get him to do a plenum job as well, makes the engine bay look so much more sexual.

sounds correct to me my old 33 made around the 165 pretty much same mods! threw a power fc in with new pump run at 15psi 210rwkw

but also depends on the dyno, u might go turbo tune then morpowa and you could have from 140-160rwkw... like i said dont worry about the figures! should have saved that money and put it towards a speed lab tune... u need a slap boy :(

200-220 you might be struggling bud its only a lil 2ltr, you would need to run 15-16psi and then the turbs will most prob end up falling apart, get the pump n remap for 14 psi get around 170-180 and that will be more then enough for you

Edited by shy_s6

thats what you get for going to people who have NFI

you do not need new injectors or ecu to make that power, however if its runnign too lean currently then theres a high chance your fuel pump is FUBAR in which case chuck a bosch or walbro in there.

once you have done that, make the effort to go and see jeff the speed lab and get him to remap it, then you'll be cranking the power.

BTW: plenumn wont do bollocks all for power unless your pushing 300 + rwkw...

every1 says every1 has NFI tho.... i dont know who to listen to lol.

i want to eventually get a bigger turbo so i figured to save money in the long run and remap after remap to just get an after market ECU now and save my self the trouble.

injectors and ECU will help me get that power eventually tho... i was gonna get a new pump soon anyways.

i wanna see exactly how much i can get out of the RB20!

i know the plenum wont help simon but its sure as hell looks better :(

*EDIT*

*holds nuts*

Edited by joeleo87

seriously dont get a plenum, stock plenums aren't bad at all.

Get a bosch 040 pump, ive heard nothing but great feedback about jeff, an rb20 remap will cost next to nothing in comparison to an aftermarket ecu, which isn't totally necessary as a REMAP is probably better anyways. I'd expect once you get a remap and a pump, assuming your motor is healthy id say a ball park figure of 190odd-200 on 1 bar.

it's quite simple! boostworx or speed lab! everone here recommends them but "i know a guy" so i don't use them! but if i had to i wouldn't go anywhere else

btw, isn't the r33 s2 turbo more weaker than the s1? because it's got a nylon wheel or something? i'm not sure

Edited by nos man

My car, with the same setup as yours, just with a walbro pump, made 178-180 on 8psi.

Chuck a pump in there get Jeff/Shaun to remap the ECU and see what you can get.

Want more? Put a reg on and get a bit more out of the injectors.

More after that? Well, then it starts getting expensive. Anything after that and you're also starting to sacrifice gearbox reliability.

i want to eventually get a bigger turbo so i figured to save money in the long run and remap after remap to just get an after market ECU now and save my self the trouble.

This doesnt make much sense to me

A a/m ecu is in essence just remap in a different case and may have some other options.

and after any engine mods you really *should* get a remap/retune just to make sure

also

Go see Jeff

He is very good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...