Jump to content
SAU Community

Places That Sell Helmets In South Eastern Suburbs (bentleigh/moorabbin Areas) Or Richmond/burnley Area?


Recommended Posts

Hi,

I'm looking for a half-decent helmet for the occasional track event, I've had a look at Kawasaki motors on Nepean Hwy Moorabbin but there cheapest helmets were $300 and the one that fitted well was $350.

Just wondering if anyone happens to know a place that sells helmets pretty cheap in either Bentleigh/Moorabbin area, and are hopefully open Saturdays or afterhours.

Or anywhere near Richmond or Bunley area, anywhere near work where I can slip out during lunch is good :D

I'm aiming to spend less than $200 if I can, I will consider buying second hand if I see a good helmet :P

Also, are there any particular standards I need to look out for? I've heard of snell (spelling?) and ADR standards for track events, I believe the helmet can meet *either*.

The helmet will be used for the occasional track event, as in once every 3-6 months so I don't think I need a really high quality helmet, I just want something decent.

EDIT: Opinions on what a reasonable price is for a helmet would be nice as well :D

Regards,

Gareth

Gareth, why don't you try the motorbike shops along elizabeth street in the city? They give reasonably good deals. I've seen helmets being sold for less than $200 there. No point getting used helmets. Imagine someone else's sweat will be on your head when YOU sweat... :D

Gareth, why don't you try the motorbike shops along elizabeth street in the city? They give reasonably good deals. I've seen helmets being sold for less than $200 there. No point getting used helmets. Imagine someone else's sweat will be on your head when YOU sweat... :P

Well obviously I didn't know those shops existed :D.

Excellent idea, I'll slip out during lunchtime next week and see whats available in my budget category :D

I should also check if they've got that quality 5.1 brake fluid, like the Motul RBF600 or Lucas RBF600 racing fluid, maybe I can get a deal on them :bunny:

The place I checked was $30/500ml for Motul so a little expensive.

According to the CAMS apparel info I found, helmets must match any of:

AS1698 - Australian standard

Snell SA95, SA2000, SA2005 - USA standard

SFI Spec 31.1, 31.2, 31.1A, 31.2A - USA standard

SFI Spec 24.1 - see Note (i)(d) - USA standard

E22 (with 03, 04 or 05 amendments) - European standard

BS 6658-85 Type A and A/FR (incl. amendments) - British standard

8860-2004 - FIA standard

So I think buying a motorcycle helmet should match one or more of these and I'll be fine :laugh:

Thanks for the good ideas so far!

Regards,

Gareth

Gareth, why don't you try the motorbike shops along elizabeth street in the city? They give reasonably good deals. I've seen helmets being sold for less than $200 there. No point getting used helmets. Imagine someone else's sweat will be on your head when YOU sweat... :)

On the money, Elizabeth St has plenty. Try and get there at a weekend as the selection is plentiful :)

revolution race gear, nunawading, they know what there talking about, ive done lots of track days on bikes and cars, with co drivers, and one thing i can say is, bike helmets are great for when your in the car alone but if you have a co driver/instructor with you open face is the way to go, you cant hear what they say with full face helmet.

Well obviously I didn't know those shops existed :laugh:.

Excellent idea, I'll slip out during lunchtime next week and see whats available in my budget category :D

I should also check if they've got that quality 5.1 brake fluid, like the Motul RBF600 or Lucas RBF600 racing fluid, maybe I can get a deal on them :P

The place I checked was $30/500ml for Motul so a little expensive.

According to the CAMS apparel info I found, helmets must match any of:

AS1698 - Australian standard

Snell SA95, SA2000, SA2005 - USA standard

SFI Spec 31.1, 31.2, 31.1A, 31.2A - USA standard

SFI Spec 24.1 - see Note (i)(d) - USA standard

E22 (with 03, 04 or 05 amendments) - European standard

BS 6658-85 Type A and A/FR (incl. amendments) - British standard

8860-2004 - FIA standard

So I think buying a motorcycle helmet should match one or more of these and I'll be fine :D

Thanks for the good ideas so far!

Regards,

Gareth

Dude,

dont worry about UK standard, USA standard, India Standard, China Standard. As long as you see that silver sticker with 3 or 4 ticks on it, that'll be fine :kiss:

Yeah, spend the $$ on a really good one.

Often they are

1. Lighter

2. Cooler

3. Better visors etc.

All things that factor to a comfy helmet as some of the cheap ones, after 30mins, feel like a brick on your head :)

you need to decide what activities you will be doing, how long these activities require you to have your helmet on, and how often you will be doing these activities.

if you are only gonna be doing a couple of quarter mile runs a year no need for big $$$ helmets as you only have the helmet on for short amount of time.

on the other end of the scale, if you will be wearing your helmet for hours at a time like bike riding, go for big $$$.

Thanks for all the replies I'll try and check some of those places out.

I will be wearing the helmet a bit but not that much, 20mins at a time (at least) on the 15th March, but for most of the day :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...