Jump to content
SAU Community

Recommended Posts

Hi all, I've been looking around for a while and saving even longer, and I've finally taken the plunge and bought myself an R33 GTS-T Sedan. I'll probably be hanging around the general maintenance threads a bit because I'm a mechanical noob but willing to have a go and learn as much as I can. Here's a picture of my new baby: R33Sedanpics037.jpg

The picture was taken by the previous owner who I think might be a regular on these forums (PhillB).

Hope i get to know some of you soon.

Cheers,

Adam

Link to comment
https://www.sau.com.au/forums/topic/208866-hi-all-proud-new-nsw-skyline-owner/
Share on other sites

THanks 34 GTT, I couldnt figure out how to change the car in my profile so it looks like Im stuck with a Hot JE Camira :D

Ewww :P

Go to my controls and change all your info....

Im guessing thats a four door R34 Marco (going off your cars: and your name)? Cool, I dont think I've ever seen an R34 as a four door before. Pics?

Click the link on my sig and all shall be revealed :domokun:

nice buy..

i met philb last show and shine and i remember him telling me he just purchased a r33 manual sedan...nice mods with it? coilovers?

Thanks mate, Yeah Phil has definitely looked after the car really well. She has a few tasteful mods:

Apexi WS coilovers, Pod, 3 inch cat back 5 Zigen Exhaust. Apart from that she's pretty much stock which I like!

Just hope I can maintain her as well as Phill has.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty this is your red flag. In MAP based ECU's the Manifold pressure X RPM calculation is how the engine knows it is actually...running/going through ANY load. You are confusing the term 'base map' with your base VE/Fuel table. When most people say 'base map' they mean the stock entire tune shipped with the ECU, hopefully aimed at a specific car/setup to use as a base for beginning to tune your specific car. Haltech has a lot of documentation (or at least they used to, I expect it to be better now). Read it voraciously.
    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
×
×
  • Create New...