Jump to content
SAU Community

Recommended Posts

hi ppl!

need to confirm how many litres of fluid i need for power steering and for my brakes for a R34 (turbo coupe)???

Going Castrol Transmax Z for steering, Motul RBF600 or whatever, for brakes. I know Motul can be obtained relatively cheaply from bike shops but what about the Castrol?

Autobarn told me $71 for 4 litres. I'm thinking i won't need 4 litres for power steering even after flushing it??

They also told me $34 for 500ml's for Motul!!

cheers!

daniel

hi ppl!

need to confirm how many litres of fluid i need for power steering and for my brakes for a R34 (turbo coupe)???

Going Castrol Transmax Z for steering, Motul RBF600 or whatever, for brakes. I know Motul can be obtained relatively cheaply from bike shops but what about the Castrol?

Autobarn told me $71 for 4 litres. I'm thinking i won't need 4 litres for power steering even after flushing it??

They also told me $34 for 500ml's for Motul!!

cheers!

daniel

Castrol is more expensive and, um, well it is more expensive. About $30 for Motul brake fluid is right for 500ml. Sometimes you can get it for less. Get two bottles if you want to fully bleed your brakes. Or just one if like me you are lazy & only do the fronts.

Power steer fluid. Why flush it? Just get a half litre/litre bottle. Any old stuff is fine.

Edited by djr81

so 1 litre of brake fluid would be enough to flush and fill up?? (i'd be doing all the brakes)

Don't like to skimp on the cars lubricants, especially not before a track day. Plus, the steering rack has been binding up quite quickly after some slaloming and i'm trying a quality hydraulic fluid as my first step of trying to fix it. I might need a cooler for it, but i'll see if i can fix it just with fluid at this stage.

So power steering doesn't need much either??

so 1 litre of brake fluid would be enough to flush and fill up?? (i'd be doing all the brakes)

Don't like to skimp on the cars lubricants, especially not before a track day. Plus, the steering rack has been binding up quite quickly after some slaloming and i'm trying a quality hydraulic fluid as my first step of trying to fix it. I might need a cooler for it, but i'll see if i can fix it just with fluid at this stage.

So power steering doesn't need much either??

Yes a litre of brake fluid.

Power steering fluid is cheap as chips. NFI how much you need but a litre would be in the ball park.

If you steering is binding get it checked properly. Don't go to a track day with a potentially dodgy car it WILL end in tears.

the last day i was at, there was a little motorkhana section, and the instructor for that bit took my car out and he said it was normal for road cars to start doing that under these conditions, and it was probably just the steering fluid overheating. He didn't seem to think it was much and was some dual motorkhana champion or something...

and i don't know how you could check something like that without trying to replicate the problem with some "turning" intensive driving....

  • 4 weeks later...

conclusion:

1 bottle of RBF600 was enough to flush a bit and fill brakes.

still have about 1.5litres left of Transmax. Apparently the power steering fluid was black as anything, just horrible, and took a bit to flush. So i wouldn't say 2.5litres would be normal, but i don't think mine had ever been changed.

as far as i could tell from my track day, the Transmax has fixed the binding issues...

You did the flush in only 1 bottle of RBF600?

I used 1.3 (or maybe 1.5) bottles, but we did flush it really thoroughly just to make sure the RBF600 didn't mix with the old brake fluid (as I didn't know what fluid was in there).

i used like 1.9 bottels just to make sure...hehe if brake fluids are of different colour it helps let u know.:P

Well this was the colour of my brake fluid the last time I changed it. So it shouldn't be too hard to tell the difference. :woot:

post-5134-1207195104_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...