Jump to content
SAU Community

Recommended Posts

Hey guys, I need to get a respray mostly for my quarter panel but im just gonna do a whole car instead, what happend was the paint on the quarter panel is cracking, my mate says its from the sun due to i think it being hit in japan.. im looking for pretty much an all black respray, i heard it would end up being about $1500 do you guys have any good prices or places near Dandenong to do it?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/209308-respray-in-se-suburbs/
Share on other sites

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Hey guys, I need to get a respray mostly for my quarter panel but im just gonna do a whole car instead, what happend was the paint on the quarter panel is cracking, my mate says its from the sun due to i think it being hit in japan.. im looking for pretty much an all black respray, i heard it would end up being about $1500 do you guys have any good prices or places near Dandenong to do it?

Thanks

Hey cosmokram3r,

Let me know how you get on... My 33 had an unfortunate conversation with a brick letterbox and I am possibly considering just having it repaired and then a full respray (I can get it repaired for a couple of hundred bucks, but it's about $700/$800 with painting... so if it works out at like $2000 for a full respray then it might be worth it as the paint's in 'alright' condition... nothing too flash).

Edited by Samon
$1500 will almost certainly be a cheap, bad quality job

I was kinda thinking along those lines... I would have expected amore in the region of $2000-$3000, possibly up to $4000

If you sand back and prime the whole car yourself it's more like $700 :banana:

I had a quarter panel of mine done at Imperial Finish Body Works on Centre Rd in Springvale. Came out great, happy to recommend them. Don't know about prices for full respray though. Believe the owners name is Murray.

my mate told me the panel beaters that would do it for around $1500-2000 are in noble park a few shops down from noble maccas.. i heard DT panels is good but expensive so yehhh wandering now if it would be better to go to the place my mate was talking about, he had his car done there because my mate brings him business, sanded it all down himself think it cost him around $1000, if you've noticed a ferrari red r32 around noble/dande area thats it it looks real good.. i just didnt know how much resprays usually go for, so wasnt sure about the $1500-2000 price if it was good or bad, sounds like a top price now

Edited by cosmokram3r
In My Sig

$4-5k for a proper respray

yeh i agree 4-5k sounds bout right. thats what i got quoted for a full respray. If your willing to travel a bit Gal Smash Repairs on Garden Drive in Tullamarine are pretty good.

give him a buzz and speak to Dave, he'll sort you out.

I'm a spray painter and I'm only gonna say this one time and one time only! YOU GET WHAT YOU PAY FOR!

If you pay $1500 for a full respray, it'll probably look pretty good for the first 6months... until the paint starts to peel off on all the edges of the panels...

Also, for that price, don't ecpect that anything will be removed from the car... I mean, everything will be masked up and also, don't expect that ANY form of repairs will be done... I'm talking, no stone chips filled in, no car park din''ts fixed, etc etc..

Bsaically, if you love your car... being a tight arse now is gonna cost you more later.

DT Panels expensive????? hahaha, your mates are on drugs

$2K - $2.5k is dirt cheap for a respray and a $1-$1.5k i wouldn't even classify as a respray... more like just a "spray"

If you're fussy, realistically you gotta spend upwards of $4k, more like $5k+

If you want a killer job, Mr Gloss is in Moorabbin, don't expect much change from $8k though.

Spray painting is about a close a real world example of 'you get what you pay for' as you'll ever get.

good luck! (my car was resprayed at DT Panels)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...