Jump to content
SAU Community

Recommended Posts

I'm upgrading my braking system as the old R30 shit ain't cutting the mustard anymore.

Probably going with Z32 4 spots up front and 2's in the rear and quiet possibly using R31 bits to mount the calipars on.... BUT... here's my issue -

The 3 piece alloy work rims i have won't fit anything bigger under them as they are 15inchers so i'll need something bigger and i need some advice.

I'll be going up to some 17inch rims to suit the car, but, offset and stud pattern are holding me up......

Would like to go to a nice common offset and stud pattern to make finding rims a little easier other wise i'll get some made up.

So any tips on my project????

Link to comment
https://www.sau.com.au/forums/topic/209343-r30-brake-and-wheel-upgrade/
Share on other sites

My car runs a 17" x 9" with a +35 offset with a 20mm spacer and they sit pretty much just in the gaurds with a touch of camber with r33 brakes (which are probably a bit of over kill and too heavy, in need of a down grade). I don't have any pics here on my work computer but I know I have post them up a few times on here before.

It is possible to fit those 4 pots brakes under 15's my mate bluey runs r33 brakes under a 15" with a 3mm spacer for just enough clearance.

if you put s13 hubs on the fron with coilovers then throw on some big discs and calipars. Then any rims

that fit silvias and 180sx's (over 15in) should fit.

Im in the process of fitting 32GTR discs and calipars to the front. Havent had a look at the rears but i do

have the rear 2pots to go on also. Not sure about rear mounting points and hand brake cable assembly yet..

if you put s13 hubs on the fron with coilovers then throw on some big discs and calipars. Then any rims

that fit silvias and 180sx's (over 15in) should fit.

Im in the process of fitting 32GTR discs and calipars to the front. Havent had a look at the rears but i do

have the rear 2pots to go on also. Not sure about rear mounting points and hand brake cable assembly yet..

Are 32 GTR bigger than Z32's?? might be a bit of over kill don't you think?? it's still a light car..

My car runs a 17" x 9" with a +35 offset with a 20mm spacer and they sit pretty much just in the gaurds with a touch of camber with r33 brakes (which are probably a bit of over kill and too heavy, in need of a down grade). I don't have any pics here on my work computer but I know I have post them up a few times on here before.

It is possible to fit those 4 pots brakes under 15's my mate bluey runs r33 brakes under a 15" with a 3mm spacer for just enough clearance.

thes work rims have a pretty unusual offset (can't remeber what they are) and will pretty much only fit an R30 import. Plus they have a raised centre in the wheel which barely clears the standards brakes so i'm going to have to get bigger rims

if you put s13 hubs on the fron with coilovers then throw on some big discs and calipars. Then any rims

that fit silvias and 180sx's (over 15in) should fit.

Im in the process of fitting 32GTR discs and calipars to the front. Havent had a look at the rears but i do

have the rear 2pots to go on also. Not sure about rear mounting points and hand brake cable assembly yet..

Thats wrong, cause im using silvia rims on my car with silvia rotors and its doesn't clear them and im running a 17x7...Had to get a 25mm spacer for the front

Are 32 GTR bigger than Z32's?? might be a bit of over kill don't you think?? it's still a light car..

I think they may be slightly bigger and slightly thicker.

Only using the 32 parts coz i got them cheap, so im not worried about overkill.

Thats wrong, cause im using silvia rims on my car with silvia rotors and its doesn't clear them and im running a 17x7...Had to get a 25mm spacer for the front

I said they SHOULD fit not that they WILL fit.

At the moment i have silvia rotors and calipars sitting under 15in silvia rims.

What silvia rims are 17x7??

So whats the largest wheel width and tyre size that will comfortably fit under the guards without flaring the guards or going too deep into the wheel arch?

I run a 17" x 10" on the rear, 17" x 9" on the front. Only have lipped rear gaurds, easy as to do without damaging the paint. No scrubbing anywhere and I run huge steering angle and a fair whack of castor.

Or of course there where these wheels I had for a bit. 15 x 7.5 -10, should have kept them.

post-8231-1205314768_thumb.jpg

I run a 17" x 10" on the rear, 17" x 9" on the front. Only have lipped rear gaurds, easy as to do without damaging the paint. No scrubbing anywhere and I run huge steering angle and a fair whack of castor.

Or of course there where these wheels I had for a bit. 15 x 7.5 -10, should have kept them.

a bit of dish is mean thing!! :(

i'm looking at something around 17x8 and 17x9 with a nice bit of dish in the rear

I'm upgrading my braking system as the old R30 shit ain't cutting the mustard anymore.

Probably going with Z32 4 spots up front and 2's in the rear and quiet possibly using R31 bits to mount the calipars on.... BUT... here's my issue -

The 3 piece alloy work rims i have won't fit anything bigger under them as they are 15inchers so i'll need something bigger and i need some advice.

I'll be going up to some 17inch rims to suit the car, but, offset and stud pattern are holding me up......

Would like to go to a nice common offset and stud pattern to make finding rims a little easier other wise i'll get some made up.

So any tips on my project????

hey dude just run a set of standard r33 gts-t brakes all round

and you will stop on a dime .maye a few mods needed(i have'nt done such a conversion)

but i will i so home work and let you know :(

Alright heres how the situation looks.....

need some wheels first but i'll get that sorted quick enough..

probably going to use r31 front struts in the front and adapt the Z32 calipars to them...(apparently it will be easier) plus i already have R31 shocks in my struts at the moment... we just trimmed a bit off to make them fit.

just had new lower control arms fitted yesterdy.. made a nice differnce in the driving comfort.. but we'll probably ditch them and fabricate some nice adjustable ones down the line so if anyone wants some spanking new controls arms drop me a line... same as the local r30 and at $160 each they're pretty cheap..

anyone got a difference of opion here...? haha i know there will be someone..

Dave

Edited by GTR30
What sorta wheels you after dave?

Something similar to what i already have.. kinda attached to this rims so i'll be sad to see them go.

17inch with a bit of dish to it and 5-7 spoke.. been looking at some work rims that look pretty nice..

see my profile for pics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...