Jump to content
SAU Community

Recommended Posts

http://www.skylinesaustralia.com/forums/Fs...25-t209815.html

RB25 PFC with 480cc injectors for $1400

You could sell the injectors for say minimum $200 so your PFC cost comes down to max $1200

You should grab this package Ash - its pretty good

and FKYOU for getting another R33 bitch :down:

Depends what your aims are... for your everyday streeter with a hi-flow turbo, slightly bigger injectors etc. an E-Manage Ultimate would be more than enough. If your going to make big power it would be better to spend the extra money and get something that's suited for tuning big turbo's i.e Autronic.

well i dont wanna do to much. car already has FMIC all ill be doing is full turbo back exhaust, GTR fuel pump and slightly bigger injectors and just get it all running well on a safe tune to run the stock turbo so the max boost id like the turbo to run is 10psi so just something that will run all these things happily

so you bought another 33?

haha..

lol well what can i say i started missing my old car so thought id jump back in

go the powerfc, sorry wins hands down in most cases unless you can afford wolf 3d, autronic, motec

it just seems with the other piggyback style systems you need to find a competent tuner

then you are back to the old remap style issue where only 1 or 2 workshops can do / fix it / tune it

so your stuck with lack of competition, options and alternate/cheaper pricing

if i was to do another car , powerfc no questions

i would love a PFC but trying to find one for GTST's are getting pretty hard and also at times very expensive so just keeping my options open

http://www.skylinesaustralia.com/forums/Fs...25-t209815.html

RB25 PFC with 480cc injectors for $1400

You could sell the injectors for say minimum $200 so your PFC cost comes down to max $1200

You should grab this package Ash - its pretty good

and FKYOU for getting another R33 bitch :P

hmmm thats a nice package

lol love you to abu and you know why im getting the 33

coz they are teh best then 32s :down:

thought you cant use R34 PFC on a 33???

Ive got an r34 gtt apexi powerfc I'll sell for $1200 plus post bag

was going to use it but will go for the ecu remap option. (stagea; cbf with rewiring parts of my loom to suit the Pfc)

thought you cant use R34 PFC on a 33???

the stagea used an r33 ecu with an r34 plug on it.

quite weird

there are 3 different pinouts for the stagea series 1 dependant on month

It works fine, needs a small rewire for TPS (r34) to work as attessa for the stagea.

but I CBF. auto + no ign.retard on gearshift = bad gearbox down the track, and I cant be bothered with that.

better off selling, getting $ back and using that on a ecu remap

Just use the factory ECU. Dr-Drift can remap them. More stable than the PFC, can be tuned EXACTLY the same.

If you want anti-spank and wank-control, then go for an Motec for top of the line, Autronic would have to be next, then Haltech (but go the plug in version coz Haltech don't know how to wire their own ECU's)

powerfc is old and overpriced.

E-manage Ultimate is the best replacement for the pfc.

people seem to think it just another safc but it is far from that and is alot better than the pfc in my books. able to have more than one map sorted in the ecu and change maps on the fly by a flick of a switch, launch control, ignition cut limiter just to name some of its features.

not to rub salt in old wounds...but i used to be this arrogant and naive. the powerfc is old...but this means it is tried and proven with heaps of tuners out there.

i sold my emu because they are a piece of shit! no one tunes them and they are bloody hard to tune. and half the functions it has u simply dont need. speed cut eh? just cut the wire on the ecu.. launch control eh? propper pedal control or even a bee*r limiter will do better than the emu.

DONT GET A EMU. it is new and lacks development atm. not enough of a customer base to justify investing in its use, so no one tunes them.

Edited by r33cruiser

have people had much experience with the wolf 3d v4, or the microtech lt8?

I am able to get either one for under $1000, second hand, and am contemplating of going one of these instead of the pfc.

wolfs come with a boost controller as well, right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...