Jump to content
SAU Community

Recommended Posts

So anyways....thought i had a slow leak, turned out it was a crack in my rim.

Getting the rim fixed, but noticed that the camber wear on my tyre is so much that it it's now not exactly legal. Now given that my rim repair is going to be around $130, and I'm broke, i just need the tyre put back on for the next two weeks til i get paid and can think about replacing the tyre (which has about 11mm of tread everywhere except the inside 15mm of the tyre).

So does anyone know of a smaller tyre place close to the city that would just put the tyre back on for me? Or do you think a normal tyre place would put it back on for me if i said i was just taking it to the track or something?

dodgey i know, but i really can't afford new tyres at the moment!!

Link to comment
https://www.sau.com.au/forums/topic/210201-tyre-fitting-for-not-so-legal-tyres/
Share on other sites

You could try taking the wheel and tyre in separately and asking them to fit it, I dunno whether they'd make you sign a disclaimer or something but they might do it. I've had tyres fitted before that were going to the track on the back of a drift car, I think they just noted on the invoice that the tyres were not legal for street use or something like that. You'll still have an illegal/defectable tyre and a cracked rim though, so it's not ideal, and certainly not something I'd do myself.

A better option would be to try to find someone who will loan you a rim/tyre or a pair/set (especially if the sizes are different) that's legal - that way you'll have some grip, and won't have insurance hassles should you run into someone or crash. What size do you have?

Use a tyre lever and squeeze it back on. Theyre just like a bike tyre but tougher

Use a peice of timber to brace against so u dont destroy your rim

Or just buy a 30$ retread or even chuck your spare on

hmm, well, i'm getting the crack in the rim repaired, so that should be an issue - but like i said, that's gonna cost around $130 i'm guessing, and at the moment (not for another 2 weeks at least), i don't have spare cash for tyres.

yeah i should have rotated the tyres at some stage - didn't realise i had that much camber on the front though :blink: and i can only rotate the fronts as i've got 8.5"s on the front and 9.5"s on the rear.

I think i'll just take the other rim off the front - put the two stockers on the front - go to the tyre shop (when i get my cracked rim fixed) and ask them to rotate the two as they are spares or for the track or something - that way they won't be fitting them to the car and they can write whatever they want on the invoice.

THEN.... i'll go buy some cheap 2nd hand tyres or something like the cheapskate that i am :D

oh and size... i'll have to get back to you, i don't even know off hand :blink:

i bought my rims with the stretched rubber already on them and I'm not really partial to it - get way to much understeer at times (which is probably largely due to my completely stock (i.e. f*cken sloppy) suspension.

So you got stock rims with legal tyres on them?

Don't mean to sound stupid, but why not just leave them on the car for 2 weeks. In that 2 weeks you could get a defect, crash the car and have void insurance, etc etc.

So you got stock rims with legal tyres on them?

Don't mean to sound stupid, but why not just leave them on the car for 2 weeks. In that 2 weeks you could get a defect, crash the car and have void insurance, etc etc.

ummm, i think that's what i meant when i said "think i'll just take the other rim off the front - put the two stockers on the front"...

^^ um, i'm not sure how you figure that. i started the thread as a couple of tyre places i went to didn't want to fit non-legal rubber to a rim while it's not on the car, so i was asking for any knowledge of places that would - for example if they didn't mind fitting non-legal rubber if it was for drfit/track. but your input has been super-valuable thus far :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...