Jump to content
SAU Community

Garrett Gt2860r -5, Gt2860r -7, Gt3071r Turbos


Recommended Posts

Hi guys,

recently i managed to get a good deal with a supplier in USA to get good prices with Garrett turbos. For now, i have confirmed deals for Garrett GT2860 - 5 and Garrett GT2860 - 7 turbos for RB26DETT engines.

Price for 2 X GT2860R - 5 will be AUD$2,150 delivered

Price for 2 X GT2860R - 7 will be AUD$2,150 delivered

Price for 1 X GT3071R (T3 Flange) will be AUD$1,500 delivered

gt2860r7071605part1yx5.th.gif20080305lara0103080036ji8.th.jpg

Delivery time will be 6 - 12 days after payment has been cleared

Supplier Details : PSI Parts

159 Ivyhurst rd

Amherst,NY,14226

Prices for just a single turbos or turbos for other engines, please PM me and i will contact the supplier.

Duration of the group buy will be for 2 months. Ending on 15th May. After that, depending on the demand, we may organize another buy again.

Please note, all money transactions will go directly to the supplier, i am not making any extra money through this.

Interested parties please PM me for details of payment and delivery.

Items comes with 12 months Garrett warranty on manufacturing defects.

Admins and Mods, please let me know if there is any other information you require from me for this group buy to proceed according to SAU forum rules.

Thank you.

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

hey there

this looks awesome, as im looking at getting turbos for my gtr

so if i deposit modey now i get them in 6-12 days or do i get them in may??

do they come with any type of warranty etc??

hey there

this looks awesome, as im looking at getting turbos for my gtr

so if i deposit modey now i get them in 6-12 days or do i get them in may??

do they come with any type of warranty etc??

Hey,

If you pay now, you will get them after 6 - 12 days once payment is clear.

I will check with the supplier regarding the garrett warranty.

do these come with anything else, other than just the turbos

as, im aware the HKS kits come with oil lines, gaskets etc...

but they are more pricey

Unfortunately they just come with the turbos just the same if you buy them from hi octane racing or Croydon racing.

Yes the HKS GTSS kits come with the oil lines etc.

Got a reply from the supplier.

The turbo comes with a 12 month warranty. It can be claimed through the Australian Garrett distributors or sent back to the states either way.

BlitzR33 - Sorry you have to get the gaskets yourself. However, these turbos will bolt on to the standard ones.

I am tossing up between the gt3071r and a GCG highflow. My question is as i can not find it elsewhere what is needed to bolt the gt3071r to an rb25, is it just modified oil and water lines or the whole hog meaning custom dump pipe and intake side as well.

Guest Rotary20B
I am tossing up between the gt3071r and a GCG highflow. My question is as i can not find it elsewhere what is needed to bolt the gt3071r to an rb25, is it just modified oil and water lines or the whole hog meaning custom dump pipe and intake side as well.

I'm in the same position, was going to get a GCG high flow but now leaning this way

Guys, if i'm not wrong, the GT3071r will produced much more power than the GCG highflow. It is similiar size to the HKS 2835 but i'm not sure on that. But it is cheaper than the high flow which GCG charges $1,950.

If you want, go to the Garrett webpage and they'll show the sizes of the turbo.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...