Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

  • 7 months later...

FINALLY got my remap done after sorting out alot of other issues. Modifications are as follows - 3" to 3.5" turbo back exhaust, pod, splitfire coilpacks, 10psi, front mount intercooler - made 164rwkw on a dyno dynamics. Since then I have boosted it to 12psi and remapped with a Toshi road tune (quite freaky looking out for cops) then went on another dyno dynamics and got 190rwkw.

With the road tune, I decided to make it a safe tune with no knocking with margin for summer days. If I pushed the tune to slight knock I would have made 200 easily but then have to spend thousands replacing/fixing an engine when the summer heat has toasted it. With the first test remap, straight away I could feel the better response and after that it just got better until I had to settle for less power but safer ride.

On the dyno graph the curve is smooth as and my AFR sat on 11.6.

Sorry I will not be posting up the graph since on the second and third run my boost just died in the ass and ran 7psi and YET I still made 190rwkw but the AFR was at 12.8 which is the cause for the same power output. Most likely I have a leaking blow off valve as my hoses were not leaking nor blown off. To add, if I had an electronic boost controller which kept the constant 12psi at high end I would have seen a figure closer to 200 as my boost dropped off to 10psi due to the manual boost tee. Just some food for thought.

Anyways, I have been to Toshi a few times to get a remap but had so many problems that occured and he has helped me along the way free of charge. Very nice to work with and extremely helpful. Maybe he wants business but to me thats great business ethics. He doesn't want to give you the best power output for the sake of saying he can tune it for the best power, but he advises on what he thinks is a safe tune that will keep your car running healthy (unless you say other wise).

Long story short - VERY happy with the remap!

You will get 200 with 12psi, I am currently changing my manual boost tee back to the greddy profec b spec ii solenoid and turning the unit back on to tune it to hold 12psi. Will put it back on the dyno hopefully next week and I will update with a dyno graph.

Yea you will easily make 200 mark :(

Another reason why i didnt go up above 10psi was coz my my 10 dollar boost controller wouldnt let me. Also i had a track day the next day :P

So thought keep it safe at 10psi.. Never changed it since.

I mean i got 196kw. Doubt i will feel 4 extra kws.

Im happy to hear more and more ppl are getting it tuned by toshi. Great bloke!!

$500 on a remap sounds a bit steep. especially when you're only getting to use it on the setup you go in with, then you've got to spend the $500 again.

ive gone a different route - ive got a mines retuned ECU and an emanage ultimate to back that one up.

i'm currently a part of a group of people that are trialing the 'beta' stage of some new tuning software that will help DIY tuners with PFC/emanage/motec etc. tune their own cars. i've personally seen GREAT results but there are some bugs to be fixed before this software goes into production - thing is you dont have that type of option/support for a remap.

remaps are great, dont get me wrong but you're limited to things like running map sensors, launch control, ign/inj temp adjustment, knock sensor adjustment etc etc etc. for $500 a pop i think you could do better than a remap.

Was thinking the same thing Joe.

I was about to do the remap but have gone with a Nistune instead. Similar $$'s, but once in it's tuneable through anyone with the Nistune software or you can get your own software license.

Also agree remaps are great, but for the fact that once in, i could go to a number of tuners if i wasn't happy was what clinched it. And all Nistune tuners I've spoken to, are just as happy with it as they are with PFC's etc.

But, great to see you guys are getting excellent results.

$500 include chip , modified ecu and real time ecu tune labor on the road.

Road tune take around 4 hours.

Is this expencive?

I don't think so.

Considering that with light mods, people are getting similar results to power FC's, I think the price is quite cheap.

$500 include chip , modified ecu and real time ecu tune labor on the road.

Road tune take around 4 hours.

Is this expencive?

The price isnt what is being disputed mate, its an average price for a tune. Just saying that you dont have other things as i mentioned above that go with it in the $500. These things matter as your plans for the car change - and often do.

In total, ive had 3 setup changes. first it was the usual exhaust/cooler which i used an SAFC to tune with.

Then i went bigger turbo which i used a remap to look after.

Now ive got a new plenum 740cc injectors, 3.5" exhaust getting the full track/drag setup with around 20psi, launch control, map sensor, ign/inj adjustment maps, knock sensor maps, A/F target maps and data logging which im running off an emanage ultimate that i got for $540 off ebay which i installed/tuned myself.

Just something that ive been through and thought alot about.

How much is it to re-tune a previously tuned chip?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
×
×
  • Create New...