Jump to content
SAU Community

Recommended Posts

Hi Guys

Selling my rb2.1 has done less than 4000klm putting car back to standard to sell spec's are

Rb20 block bored 40 thou cracked checked acid cleaned line bored

arias 40 thou oversized pistons

rb26 conrods resized shotpeened and hardened and balanced arp rod bolts

rb25 crank with n1 colar fitted checked and balanced

n1 water pump

n1 oil pump

arp main and head bolts

hks cams 264 9mm lift

hks cam gears gates timing belt

rb20head port and polished with 1mm oversized valves

oil return from head to sump

tomei oil restrictors

no turbo or injectors or ecu

thats about all I can think of atm but will update if I remember anything else, engine has made 306rwkw with only 1800k's on it, in an r32 gtst and has run an 11.7 at wsid on its second outing so there was more in it

Price $6500 which is less than half what it cost to build

location is sydney west

Will update with pics of build a bit later

Cheers Peter

Link to comment
https://www.sau.com.au/forums/topic/210438-eoi-rb21/
Share on other sites

  • 1 month later...
  • 2 months later...

I can vouch for this set-up as I have been in the car numerous times.

A really tough and well thought out engine with a lot more left in it.

Someones going to pick up an awesome engine package.

Cheers

Daniel

Link to comment
https://www.sau.com.au/forums/topic/210438-eoi-rb21/#findComment-3991636
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...