Jump to content
SAU Community

Recommended Posts

I wired everything up yeah

But my remote i think is not connected properly

I dont know whats wrong.

The blue cable from the back to the Amp, but it still not turning on.

I got everything else working, it works in my mates car just not mine.

The Ant Cont from my Head-deck is not plugged into anything.

Neither is one of the black cables, which is ment to be ground, but i always have a ground for my Amp.

So why would i need a ground for my headdeck.

Headdeck works perfectly.

Just these two blue cables i dont get, the Ant Con... and some other one near the Red and Black wire.

Help ?

Link to comment
https://www.sau.com.au/forums/topic/210543-r32-gtst-wiring/
Share on other sites

hey mate.

what is your amp connected to now as? in the trigger wire or the remote wire which ever you want to call it.

also you said that the deck had the antenna wire connected to nothing.. what the antenna wire is , is just for the cars for electronic antenna so that is sends the signal for it to come up when the radio comes on.. if you don’t have a electric antenna what you can do is connect the antenna wire to the trigger connection on the amp. and it should work.

p.s just in case make that 100% sure with an audio installer but that’s how i did it to my amp and it works.

niran

Link to comment
https://www.sau.com.au/forums/topic/210543-r32-gtst-wiring/#findComment-3733343
Share on other sites

Have you tried to bridge the remote and battery positive supply at the AMP wtih all RCA and speaker out put connected??

The supply to the remote out of the deck is a 12v constant that cant draw more than 100ma.

If you connect it to the antenna the signal is a pulse and wont trigger tha AMP properly.

If you really want to, you can connect the remote wire to the accessories behind the deck for a temporary fix.

As for the earth wire, you need to connect it behind the head deck as the earth is being traced through the antenna at the moment.

This maybe the result of no out-put from the remote wire....

Last case scenario, your head unit isnt putting out a remote signal.

Goodluck sweetheart! LOL

Link to comment
https://www.sau.com.au/forums/topic/210543-r32-gtst-wiring/#findComment-3738955
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...