Jump to content
SAU Community

Recommended Posts

hey guys/girls

i got a Beltronics Vector LR that i received of a mate for free as he said it wasn’t working last time he checked. i found a power connection for it and turned it on, and as my mate said, it comes with a error.. it starts of normal and comes up with the normal start up display but after about 5-10 seconds of being on it comes up with . " ?LO1 CAL" i asked some of my friends and one said it may be a calibration error.

Does anyone know what this error is or what " ?LO1 CAL" stands for. also does anyone know whether this problem is fixable and if so an approx. price.

Thanks any help appreciated niran

Link to comment
https://www.sau.com.au/forums/topic/210675-radar-detector/
Share on other sites

hey guys/girls

i got a Beltronics Vector LR that i received of a mate for free as he said it wasn’t working last time he checked. i found a power connection for it and turned it on, and as my mate said, it comes with a error.. it starts of normal and comes up with the normal start up display but after about 5-10 seconds of being on it comes up with . " ?LO1 CAL" i asked some of my friends and one said it may be a calibration error.

Does anyone know what this error is or what " ?LO1 CAL" stands for. also does anyone know whether this problem is fixable and if so an approx. price.

Thanks any help appreciated niran

I found that powering it on from cold it worked fine, if it was in the sun for too long it would start giving me that error. Lucky for me it was still within it's 3 year warranty and I took it to a supplier and repairer and they actually replaced it (and with a newer model), place was called Neltronics in Subi.

Link to comment
https://www.sau.com.au/forums/topic/210675-radar-detector/#findComment-3724498
Share on other sites

hey guys

i rang up neltronics however the number that was on yellow pages, does not work.. If i try ringing, it just says the call could not be connected. the number i dialled was (08) 9388 9950, does anyone else know of another number for this store??

Thank’s

niran

Link to comment
https://www.sau.com.au/forums/topic/210675-radar-detector/#findComment-3725306
Share on other sites

OK.. here's the story...

"LO CAL" (or "MARKERS" or "PLL LCK") is a fault code describing some kind of error has occured during a calibration test. BELTRONICS are keeping their software to themselves to avoid Chinese manufacturers from reverse engineering their products and whacking on the software... smart hey! :)

To repair this issue we would hopefully have a replacement board here in stock... we simply open up your faulty unit... put in the refurbished board... set up the menu and bands and away you go. The faulty board is then shipped to BELTRONICS to be refurbished and reflashed with new software.

The software repair is $95.

In WA cops use:

Multanova (not multinova!!!) which is a Ka band radar signal... low output so hard to detect

Patrol cars which use a K band radar signal... strong power so easy to detect... BUT... remember not every car is equiped and if they are, they might not be turned on

Sgt Plod himself uses a hand held laser signal... very strong, very fast, very accurate, VERY NARROW so damn hard to detect unless its fired right at your detector at which point they probably have you anyway.

That concludes todays lesson kiddies... now you can all go home, except Ossie... come here for a touching!

Link to comment
https://www.sau.com.au/forums/topic/210675-radar-detector/#findComment-3726617
Share on other sites

$95 to repair? What about warranty ;)
i got a Beltronics Vector LR that i received of a mate for free as he said it wasn’t working last time he checked.

Need I say more!!!

Plus the fact that a Vector LR came out around 9-10 years ago with a 1 year warranty.

Pulp, what unit do you have?

Link to comment
https://www.sau.com.au/forums/topic/210675-radar-detector/#findComment-3727163
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
×
×
  • Create New...