Jump to content
SAU Community

Recommended Posts

Be carfull with getting wide tyres on a front engine rwd. As I found good 285's - 335's are all designed for rear or mid engined cars that have a lot of weight over the rear wheels. In a front engine rwd you will never get the tyre working properly to generate any grip. Dunlop do make a good 285 but again its in a hard compound designed for Porchers :(

  • Replies 1.9k
  • Created
  • Last Reply

Top Posters In This Topic

Our car was 30K...but then broke the world record for labour charges for a GTR street engine build (no, unfortunately we didn't build this one) So yes you car may be cheaper than ours...hehe

Is that from the same people who brought you "2hrs labour/install for a plug-in ECU" ??

Dunlop do make a good 285 but again its in a hard compound designed for Porchers :D

Woops Dunlop do make a good 295 not 285 but it is for Porchers. There is a 285 in a Bridgestone RE55 but you will never fit it on a jap car as it is way too tall. Again it doesnt come in a soft enough compound for a front engine rwd :laugh:

thinking of running a book on what our best time will be.

bit like a guessing competition, contestants nominate a lap time to the nearest 10th of a second...$10 to enter...winner takes all. Nearest to the time wins or 1/2 the cash if tied.

so who's in?

Woops Dunlop do make a good 295 not 285 but it is for Porchers. There is a 285 in a Bridgestone RE55 but you will never fit it on a jap car as it is way too tall. Again it doesnt come in a soft enough compound for a front engine rwd :O

I'm running 265 wide Re55s on my GTR and a couple of the guys at QR are running 285s on theirs... ?

edit: Paul I havent used one on mine but really need one. Have watched the guys with one at QR in comparison to me and corner exit looks a whole lot more pleasant than without one!!! lol

Edited by wrxkilla
Paul I havent used one on mine but really need one. Have watched the guys with one at QR in comparison to me and corner exit looks a whole lot more pleasant than without one!!! lol

Our suspension mechanic looked at some details on it today...he's impressed with it. Im sure Luke will get the best out of it.

I think we are running 285's on the rear of the Honda S2000. Just got some new wheels so that they will fit in the standard guards....yeah baby.

can i use your old ones boz the hq rubber is to small 195/60/14 but the white walls look great on the gtr

How are the tyres coming along Jas?

I have some spare white walls if needed :D

I think they are only 12 inch in diameter as they may be from my old Datto 1200 days.

Edited by Bozman1
Ruzic ATTESSA controller going in car this weekend...anyone got one/used one?

Currently run one in my 33 GTR. I like it. Allows for more control over the power shift. Certainly makes my front diff work a litter harder (and hotter) as I tend to have the power transfer come on quicker than standard. For want of a better word, gives you more "feel" and more controlled power slides in tight corners.

Guest
This topic is now closed to further replies.



  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...