Jump to content
SAU Community

Recommended Posts

With little tad more boost say 12psi, i reckon 200kw is easy to acheive.

With the remap i have noticed a lot more midrange power.

Also 1st gear just revs out like crazy.

But get yourself a full exhaust and straight away you will notice a big difference.

Edited by siddr20

Nice work Toshi. Some good results siddr20. Thinking about going with a remap aswell.

Just a quick question guys, abit off topic, wots the model number of the walbro pump u guys are using??? GSS-341 or 342??? Just wanna know so i dont get the wrong 1 for my 33!

Toshi,

Were you just using Sidd's R33 ECU, I thought there was an issue with them not being able to be remapped and they would swap them out with R32 ones instead as the VCT wouldn't activate..

I'm guessing this been resolved as it was somethign that discouraged me in the past?

What price would we be looking at for a tune - can you pm me prices?

Cheers

I sent PM.

Thank you

Toshi,

Were you just using Sidd's R33 ECU, I thought there was an issue with them not being able to be remapped and they would swap them out with R32 ones instead as the VCT wouldn't activate..

I'm guessing this been resolved as it was somethign that discouraged me in the past?

What price would we be looking at for a tune - can you pm me prices?

Cheers

I sent PM.

Thank you

Hey Toshi

Would you be able to post the answer to Links' question for us here? I was also aware of the stock ECU's resisitance to remapping, but can't recall the reasons...

as well as the prices, as it definitely sounds like a good option for those looking to get a bit of extra power from mild mods

Hi smasha

This is my advertisement.

http://www.skylinesaustralia.com/forums/Re...ml&hl=toshi

Hey Toshi

Would you be able to post the answer to Links' question for us here? I was also aware of the stock ECU's resisitance to remapping, but can't recall the reasons...

as well as the prices, as it definitely sounds like a good option for those looking to get a bit of extra power from mild mods

ahh btw, i took my car out to the track yesterday. Wakefield actually!!

Friend did a 1.13 in my car.. My best time i did was only 1.17

With street rubers and stock rims..

So this tune is deff pretty damn good..

Power comes on exctly when you need it..

Just wish i had some coilovers and better rubbers..

Edited by siddr20

Mods?? heheh nothing really

Only mods - performance mods ie

- R34 Side mount

- Full exhaust system - spilt dump pipe, hiflow cat, pipe

- bleed valve

- walbro fuel pump

^ not really mods is it??

Still stock turbo, injectors etc.

sidd !

its michael how you going dude?

nice results u got there ! this seems like the way to go, im picking up my front mount tomorow, and i was considering a safc as my next mod, but this seems much better,

how did wakefield go? i couldnt make it, had to help my brother inlaw move houses that thursday

gotta catch up soon ;)

DUDE??

so didnt know SIR_RB was you?????????

You been on since 2005?? WHAT DA?? and it took you 3 years to buy a skyline? ahhahahah

Ditch that safc and get this remap.

Come over and take my car for a spin if you wish..

Wakefield was awesome!!

The tune really held up well and i had NO problems whats so ever..

Whats your msn btw?

And yea get this remap done ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...