Jump to content
SAU Community

Recommended Posts

hey guys how yas doin

ok today i got my car back with a carbon fibre bonnet, now, the carbon bonnet came with the bonnet pins but my mechanic didnt really have the balls to install them for me just incase he f**ked it, i got to the mechanic shop and he goes to me your bonnet doesnt even close, im tried to close it myself and it wouldnt close aswell, i got home and i tried again and it closed with just a little bit of force,

he bonnet seems to be on really nice but im not sure if i should still put my bonnet pins on, like it sits ecacely how the standard r32 gtr bonnet sits and isnt wobbly at all but am i taking a risk,

do yous think it will fly off if im speeding or something because how its really sitting it doesnt even look like its going to move, please let me know guys,

cheers tony

Should do something to make it more secure at least. You don't want it flying up and smashing your windscreen, but you also don't want to drill holes in for the bonnet pins to only get defected the next day for them.

Try readjusting your latch or modifying the hook maybe?

Should do something to make it more secure at least. You don't want it flying up and smashing your windscreen, but you also don't want to drill holes in for the bonnet pins to only get defected the next day for them.

Try readjusting your latch or modifying the hook maybe?

LOL narr bro, what im trying to say is that the bonnet is sitting pefect, the latch doesnt need stuffing roun with, its sitting exacely how a standard bonnet should fit so if the standard didnt fly off this shouldnt fly off, it seems really secure to me but i dont know what to do

It wont be as secure as a standard bonnet because the carbon one will weigh a lot less. At high speeds its very possible for it to fly up or at least be visibly wobbling around.

I had a carbon bonnet on my r33 and had this problem so got bonnet pins installed by a mechanic. If one wont do it take it to somewhere that will.

I would highly recommend you attaching bonnet pins :rofl:

Is it a full carbon fibre one or is it fibreglass with a carbon fibre skin, reason being I probably wouldn't trust a fibreglass one but maybe have alittle more faith in a full CF...

well how about designing a stainless wire loop which attaches to the latch some what, and has a little slack so when the bonnet is popped u can reach under it and un hook the CF bonnet. it wont be seen and it will pervent the bonnett flying up.

We recommend that you do use bonnet pins, as there is quite a lot of frontal airflow at high speeds which can cause a lot of stress on the mounting points.

I personally use and recommend Aero Catch (http://www.aerocatch.com).

ani3.gif

We recommend that you do use bonnet pins, as there is quite a lot of frontal airflow at high speeds which can cause a lot of stress on the mounting points.

I personally use and recommend Aero Catch (http://www.aerocatch.com).

ani3.gif

I love my aerocatch locks... piece of mind and they look nice unlike the standard stainless steel ones...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...