Jump to content
SAU Community

Recommended Posts

hey guys and gals i just got hold for myself a written off 32 GTR so that could take some parts off it and now got the rest of it up so grab yourselves a bargain! i know i may be leaving lots of things out so post up and item and i'll see if i still have it or if i never got it when the car was bought. shoot over offers (dont even know wat half this gear is worth) and questions anytime, i check daily :) everything is in good condition and pics will be posted when it stops raining and i can take some decent pics-

here we go...deep breath*

bare Shell minus rear driver side quater SOLD

driver and passenger door shells sold

F+R calipers SOLD

interior floor carpet $100

F + R windscreen $200EA

tyre play card $ ?

Rear seats (bum & back pieces) $200

full set of seat belts $200

stock twin dump + de-cat pipe + mild steel catback $600

brand new (only just installed then replaced) brake master cylinder SOLD

stock intercooler hoses and pipes $100

old school Blitz dual stage EBC (bit warped from heat but working)- $270

Tein's with pillowballtops (not sure model or springrate- but stiff, bout 20k's old) $600 set

Boot carpet $150 set

Boot spoiler with GTR badge(no wing) $150

Rear bar $80

Rear reo $60

upper control arms SOLD

lower control arms SOLD

rear tail lights $170 the pair

GTR fuel pump $120

GTR RB26dett head (power steering pump was ripped off literally so slight damge but mechanic has checked and said easily repairable)

driveline gear NO LONGER FOR SALE!~

32 GTR 5speed gearbox, still great $600

HKS twin plate clutch PUSH type. running great with a little wear SOLD

JUN remapped ECU $300

basically all is up for grabs minus the seats, bits and pieces from the interior, the front end panels and gear, motor..... anyways just ask and u will find out whether ive still got it :rofl: pickup is welcome from southwest sydney, interstate buyers welcome, overseas?....bring it on! buyer covers postage costs.

cheers guys!

Link to comment
https://www.sau.com.au/forums/topic/211968-32-gtr-parts-for-sale/
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

pm's replied, Shaun i will get back to you on a price for head as far as parts u need goes, might sell complete to get rid off everything, but strip it out if there is enough interest for the rest of the gear

omg work time >.<*

heya joe rear left quater $500, passenger door shell $150, havent got any guards unless u want mashed up paperweights. PM sent

got the wiring loom $250

JUN remapped ECU $300

will have a set of injectors, probs a whole heap of parts from the RB26 head as well (think it might all be stocko, but will have to crack it open to see),...hmm anything else im missing?

all PM's responded to..

anyone else need anything?..just remmber the front end is FUBAR- firewall and back is ok, few bits and pieces im keeping but pretty much everything is there :blink:

have a pair of M's hard pipes for pods as well to suit GTR $150 the pair

justcruisingaus- will buzz u during the week (better not be a timewaster or i will b VERY upset..)

BlackR32- what kinda stuff you need? have a full set of teins...

CeJay- as far as i know i bought the car with a complete rebuilt motor, hence the last owner got a new cluster. still tight, but due to being like near 20yo id guess it were at least 80k,despite the clock showing 4xk..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...