Jump to content
SAU Community

Recommended Posts

hey guys and gals i just got hold for myself a written off 32 GTR so that could take some parts off it and now got the rest of it up so grab yourselves a bargain! i know i may be leaving lots of things out so post up and item and i'll see if i still have it or if i never got it when the car was bought. shoot over offers (dont even know wat half this gear is worth) and questions anytime, i check daily :) everything is in good condition and pics will be posted when it stops raining and i can take some decent pics-

here we go...deep breath*

bare Shell minus rear driver side quater SOLD

driver and passenger door shells sold

F+R calipers SOLD

interior floor carpet $100

F + R windscreen $200EA

tyre play card $ ?

Rear seats (bum & back pieces) $200

full set of seat belts $200

stock twin dump + de-cat pipe + mild steel catback $600

brand new (only just installed then replaced) brake master cylinder SOLD

stock intercooler hoses and pipes $100

old school Blitz dual stage EBC (bit warped from heat but working)- $270

Tein's with pillowballtops (not sure model or springrate- but stiff, bout 20k's old) $600 set

Boot carpet $150 set

Boot spoiler with GTR badge(no wing) $150

Rear bar $80

Rear reo $60

upper control arms SOLD

lower control arms SOLD

rear tail lights $170 the pair

GTR fuel pump $120

GTR RB26dett head (power steering pump was ripped off literally so slight damge but mechanic has checked and said easily repairable)

driveline gear NO LONGER FOR SALE!~

32 GTR 5speed gearbox, still great $600

HKS twin plate clutch PUSH type. running great with a little wear SOLD

JUN remapped ECU $300

basically all is up for grabs minus the seats, bits and pieces from the interior, the front end panels and gear, motor..... anyways just ask and u will find out whether ive still got it :rofl: pickup is welcome from southwest sydney, interstate buyers welcome, overseas?....bring it on! buyer covers postage costs.

cheers guys!

Link to comment
https://www.sau.com.au/forums/topic/211968-32-gtr-parts-for-sale/
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

pm's replied, Shaun i will get back to you on a price for head as far as parts u need goes, might sell complete to get rid off everything, but strip it out if there is enough interest for the rest of the gear

omg work time >.<*

heya joe rear left quater $500, passenger door shell $150, havent got any guards unless u want mashed up paperweights. PM sent

got the wiring loom $250

JUN remapped ECU $300

will have a set of injectors, probs a whole heap of parts from the RB26 head as well (think it might all be stocko, but will have to crack it open to see),...hmm anything else im missing?

all PM's responded to..

anyone else need anything?..just remmber the front end is FUBAR- firewall and back is ok, few bits and pieces im keeping but pretty much everything is there :blink:

have a pair of M's hard pipes for pods as well to suit GTR $150 the pair

justcruisingaus- will buzz u during the week (better not be a timewaster or i will b VERY upset..)

BlackR32- what kinda stuff you need? have a full set of teins...

CeJay- as far as i know i bought the car with a complete rebuilt motor, hence the last owner got a new cluster. still tight, but due to being like near 20yo id guess it were at least 80k,despite the clock showing 4xk..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...