Jump to content
SAU Community

Recommended Posts

the nismo one reduces the throw by 10% where as the Cs reduces by 30% and the Cs is better quality but the nismo generally costs more, ive seen em for like $900 so this is cheap, but personally i went for the C's for better quality and shorter throw

Its not harsher on the gears, they just change the angle or the thing at the bottom so the shift is tighter and quicker.

It is shorter than standard, I'll have to check how much by. It is a NISMO product, so its pretty good.

Dj:

just going by rec retail, nismo short shifts are 16,000 yen and c's items are 39,000. who quoted you $900+???

supraman:

i'm interested in one for an r32 gtr. how much am i looking at all up including delivery to brisbane? i had a look at the nismo site and they list 2 different ones. one is a solid shift and the other is a quick shift. is yours the nismo solid shift or the nismo quick shift?

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...