Jump to content
SAU Community

Recommended Posts

well yesturday i was dragging my friend at a traffic light and i think i started off really really badly, rev'd to heaps high rode the clutch got alotta wheelspin and didnt get anywehre then my car smelt really bad made weird noises. So i took it home and realised the turbo isn't kicking in anymore. was testing it and it felt no extra power come in till 7-8 revs? can anyone help?

Link to comment
https://www.sau.com.au/forums/topic/212605-r33-gtst-trouble/
Share on other sites

well yesturday i was dragging my friend at a traffic light and i think i started off really really badly, rev'd to heaps high rode the clutch got alotta wheelspin and didnt get anywehre then my car smelt really bad made weird noises. So i took it home and realised the turbo isn't kicking in anymore. was testing it and it felt no extra power come in till 7-8 revs? can anyone help?

:D Serves you right. Its d*cks like you that give the rest of us a hard time from the boys in blue.

Hopefully the repairs will cost you so much you decide to sell your car and by a Barina with the rest of the juvenile W*nkers out there!!!

Come on Mods ban this tool!

everyone here has given their ride a squirt or 2. and for those with their holy-er than thou attitude shoud wake the f**k up and remove their head from their ass!

Edited by r33cruiser

lol thanks.. i usually dont thrash my car. I am a pretty inexperienced driver so i usually just drive safetly.. copped alotta fines etc etc in the past but just thought once in a while wudnt hurt.. and it did just tested my car again today and on the start up it made a weird screeching sound. the car itself cost 18.5g but just the repairs/defect ive had done to it is probaly 7 -8g+ now anyone know what cud be wrong? is it serious?

everyone here has given their ride a squirt or 2. and for those with their holy-er than thou attitude shoud wake the f**k up and remove their head from their ass!

He's not talking bout a little squirt, he clearly stated that he was drag racing on the streets which is both stupid and illegal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...